DSPM Power Lynx 1 Technical Specifications

Browse online or download pdf Technical Specifications for UPS DSPM Power Lynx 1. DSPM Power Lynx 1 10 pages.

Print Page

Power Lynx 1

Uninterruptible Power System (UPS)

Technical Specifications

PART 1 GENERAL

1.1 SUMMARY

A. This specification describes a single phase, on-line, double conversion, solid state Uninter-

ruptible Power System utilizing Patented ECM Technology here after referred to as the UPS.

The UPS shall operate in conjunction with the existing electrical system to provide high quality

power conditioning, back-up power protection and distribution for Lighting loads and other

critical loads. T he system shall consist of a solid-state inverter, a temperature compensated

rectifier/battery charger, a 100% rated for continuous duty static switch, an internal maintenance

bypass switch, battery plant, status/control panel, and synchronizing circuitry. The enclosure is

a Nema 3R (outdoor) rain / weather resistant enclosure designed for outdoor environmental

conditions as described herein.

1.2 STANDARDS

A. The UPS shall meet the requirements of the following standards:

1. IEEE 587-1980/ANSI C62.41 1980 Standards for Surge Withstand

Ability

2. FCC rules and regulations of Part 15, Subpart J, Class A

3. Listed under UL 924, Standards for Lighting Inverter Equipment

4. NEMA PE 1 (National Electrical Manufacturers Association) -

Uninterruptible Power Systems

5. NEMA 250 (National Electrical Manufacturers Association) – Enclosures

for Electrical Equipment (1000 Volts Maximum)

6. NFPA 70 – National Electrical Code

7. ISO 1001

8. Occupational Safety & Health Administration (OSHA)

Title: Micro

Doc No.: 018-1000-02

Description: Emergency Lighting Inverter User's Manual

Phone :

Fax:

Rev: NR

Website:

Date: 07/26/2016

E-Mail:

1.877.DSPM.POWER

1.877.377.6769

909.930.3335

www.dspmanufacturing.com