DSPPA DSP-106P Operation Manual - Page 5

Browse online or download pdf Operation Manual for Speakers DSPPA DSP-106P. DSPPA DSP-106P 5 pages. Professional poe powered loudspeaker

Print Page

POE software

1.Connection shows: Different POE loudspeakers can be selected for debugging

through the drop-down triangle arrow,and different ID names correspond to different

The speaker.

2.SCAN:Click this button to scan out the ID that is currently connected to Dante signal

device on the switch and displayed in the connection shows.

3.SAVE:Click this button to save the current EQ equalization value, gain, limit and

other parameters into the POE module.

4.LOAD: Click this button to get the EQ equilibrium value,gain, pressure limit and

other parameters on the POE.

5.EQ Flag:Click this button to reset the current EQ equilibrium value, and all EQ

equilibrium values will be restored to the initial value。

6.view:The EQ equilibrium value can be viewed in this interface.

7.EQ Filters: There are 8 ends of EQ equilibrium. Shape, Gain, Freq, Q Factor, etc.

Shape have(Peak,Lowpass,Highpass); Gain(from -12 to +12dB);Freq(from 20 to

20000Hz); Q Factor(from 0.4 to 50)

8.Limitre: Set the DRC_ATH and DRC_RTH, (from -25 to 0dB)

9.Gain: Set the gain for the POE module(from - 40 to + 12dB).You can also be

staticTone Settings. When green, it means ummute. When red, it means mute