DSPPA MAG6311 User Manual - Page 5

Browse online or download pdf User Manual for Speakers DSPPA MAG6311. DSPPA MAG6311 15 pages. Ip network ceiling speaker

Print Page

2.Description of Appearance

1．Power supply interface

Supply working power for the device.

2．Speaker

Built-in 2 × 15W digital amplifiers, the output of the power is 15W respectively. Connect two fixed

resistance (4Ω) speakers respectively.

3．EMC override play output

The output signal of this interface is controlled by the host.

4．AUX OUT

Connect other amplifiers to extend the power of this terminal.

5．AUX IN

Connect audio devices (such as DVD players) to extend audio sources.

6．MIC2 microphone interface

Connect the microphone to realize the local paging or live speech functions.

7．DATA

Extend the interface, the connection method as shown below(Figure 3.3).

connect to the network switch. Otherwise it will burn the

8．LAN1/LAN2

Dual network ports design, connect the network switch..

9．USB Disk

Insert U disk or memory devices such as a mobile hard disk on which the MP3 program is stored, it can

provide audio source for the built-in MP3 player.

10．Micro SD

Insert SD card with the host schedule at the jack, and provide the audio for schedule point when the terminal

is offline.

LAN1

LAN2

DC +15V

USB Disk

Micro SD

Data

MIC2

(注意:此端口不允许连接网

络交换机,否则会烧毁设备!)

4 5

device!)

IP Network Ceiling Speaker

(Note: this port is not allowed to