DSPPA PoE6463 User Manual - Page 6
Browse online or download pdf User Manual for Speakers DSPPA PoE6463. DSPPA PoE6463 15 pages. Public address system poe network wall mount speaker
*
*
2.2 Remote Control Diagram
Remote Control structure is shown on the right:
1.Muting button.
2.Number button:
Set parameters for IP address.
3.F5:
Press F5 to start/ stop when plugging
in USB Flash Drive.
4.Last song selection button:
CH+ for selection of the last of the
current programme.
5. Volume decrease button:
V- for decrease of the output volume of
the terminal.
6.F7:Play/ Pause button:
Press the button repeatedly to switch
between on-demand and pause.
7.Enter Key:
Press Enter button in the idle state to
adjust the output.
Bass component (0 to 15 cycles), in
other states, press Enter button as the
cancel key.
8.Nex song selection button:
CH- for selection of the next of the
current programme.
9
Cancel button:
.
Press Cancel button in the idle state to
adjust the output.
Treble component (0 to 15 cycles), in
other states, press Cancel button as the
cancel key.
10.Volume increase button:
V+ for increase of the output volume of
the terminal.
11.F3:
IP address access/ alter button. First
press to access into it, the second press
on CH+/CH- to select the parameters,
network broadcasting system
another press F3 into setting, and press
Enter button to preserve after altering,
otherwise in valid. Press Cancel button
to drop out without saving.
12.F1:Volume setting button:
Select the sound source requiring for
alteration. Press V+ and V- to alter after
selection. (AUX1 is auxiliary input,
MIC1 is MIC input and MP3 is network
sound source or USB Flash Drive)
13.Sleep button
1
2
3
4
5
6
7
3
13
12
11
10
9
8
Pic. (1)