DSPPA ABK PA-2084B Owner's Manual - Page 4
Browse online or download pdf Owner's Manual for Recording Equipment DSPPA ABK PA-2084B. DSPPA ABK PA-2084B 4 pages. Indirect speaker selector
Print Page
OPERATION
1.
Make BGM signal input from A terminal while EMC signal input from B terminal on the rear panel.
We also can make A, B together with short circuit if there is none of appropriative EMC amplifier.
Pin 1 ~ 10 of "ALARM IN"port are live terminals of CH1～CH10 respectively while pin 11～
2.
25 are com. +5 ~ 24V / 0V level of alarm signal is available. If ACTIVE LEVEL set at
positive signal is valid; while set at
switched to B while alarm signal is fed to ALARM IN, and the Switch indicator will flashes
quickly.
3.
Click down any Switching key to switch channels which you want.
4.
An grounded Alarm signal will be sent out from"ALARM OUT"while any alarm signal appears
on"ALARM INPUT".
SPECIFICATIONS
Channels
Input capacity
Output capacity
ALM
Protection
Power Requirement
Dimensions
Gross weight
Net weight
Specifications are subject to be changed without notice.
● When the "Power switcher" is off, please pull out the power cord from the socket.
● Please keep the equipment out of water.
● To reduce the risk of electric shock, do not remove the cover.
● No user parts inside. Refer servicing to qualified service personnel.
, 0V (grounded) signal is valid. Every channel will be
Low
10, switchable
70 ~ 100 V ，10 A
70 ~ 100 V ，5 A / CH
10 CHs; +5~+24 V / 0 according to presetting
AC fuse ×1
AC 220 –240 V / 50～60 Hz
485×88×378 mm
6.5 kg
5.2 kg
CAUTION
4
DSPPA ACOUSTIC TECHNOLOGY CO.LTD.
,
High