ATTC LE5304-45-560 Technical Manual - Page 7

Browse online or download pdf Technical Manual for Welding System ATTC LE5304-45-560. ATTC LE5304-45-560 12 pages. Fixed automation mig gun

Print Page

UNICABLE REPAIR / REPLACEMENT

STEP #1

•

Remove liner from gun (See Section 2.5 LINER REPLACEMENT).

Mount neck in vise.

•

Remove housing screws and slide housing back (front and back).

•

Loosen connector cone from neck using 1" (25 mm) wrench.

Remove from vise and thread out neck by hand.

•

Cable connection between cone and crimp ring should not be disturbed.

•

Unthread power pin and remove using 1 1/4" (32 mm) on connector cone and a 5/8" (16

or 3/4" (19 mm) wrench on power pin. Install new power pin.

Retrieve front and rear housing. Slide housings onto new unicable assembly.

•

Repeat procedure in reverse to assemble remaining components.

941-753-7557 • FAX:941-753-6917 • 800 342-8477 • [email protected] • www.AmericanTorchTip.com

REPLACEMENT

UNICABLE

USED UNICABLE

LIGHTNING