Atten ST-2090D User Manual

Browse online or download pdf User Manual for Soldering Gun Atten ST-2090D. Atten ST-2090D 2 pages.
Also for Atten ST-2090D: User Manual (8 pages)

Print Page
Soldering Station
ST-2090D User Manual
The soldering iron needs to be tested before it leaves the factory,
so the soldering tip may cover a small amount of tin, and the
casing will be slightly yellowing, which is a normal phenomenon.
Copyright information
The design of this product(including internal software) and its accessories is under
the protection of relevant state laws.Any violation of the relevant rights of our
company will be subject to legal sanctions.Users shall consciously abide by the
relevant state laws when using this products.
Disclaimer
We will take no responsibility for any personal injur y or property damage
caused by reasons other than the product quality problem,which may include
force majeure (natural disasters,etc) or personal behavior during the
operation of this product.This manual is organized ,compiled and released
by SHENZHEN ATTEN TECHNOLOGY CO., LTD. according to the latest product
features. We will not responsible for further notice of the subsequent
improvement of the product and this manual.
Features
· This product designed with nixie tube display.
· Combined soldering station with soldering stand.
· MCU controlled temperature calibration with PID system equipped, adjust
temperature by knob button, easy to operate.
· The handle structure is ergonomically designed for comfortable grip.
· The heating wire and sensor are made of PTC material, which is quick in
temperature rise and precise in temperature control.
· Auto-standby, auto-shut down is available.
· Using 3 cored power cable.
Appearance and control panel
1
power button
2
Nixie tube display
3
Indicate light for temperature unit
4
Soldering wire holder
5
Temperature adjustable
knob button
1
2
3
4
5
6
1
6
Temperature unit switch
/ temperature lock
7
Soldering handle
Soldering stand
8
9
Soldering tip slot
10
Tip cleaner location
7
8
9
10
3
Safety precautions
Misuse of this product may lead to serious injury to the user or material
Caution
damage to the object involved.
To avoid electric shock or injury to the human body or fire hazard,the follwing basic rules
must be observed when using the equipment.In order to ensure personal safety,only parts
and accessories approved or recommended by the original factory canbe used, otherwise
serious consequences may occur!
WARNING
When using this product, the soldering pencil/soldering tip, with the temperature up to
80-480℃，may cause burns to the user or cause a fire due to improper application.
So Users shall strictly observe the following rules:
Keep this product away from flammable materials.
Keep the product out of children's reach.
Do not use this product if you are inexperienced or have no sufficient necessary
knowledge without the guidance of related personnel.
Do not use this product under wet environment or with wet hands to avoid electric
shock.
Do not modify this product and its accessories without authorization.
Please turn off the power when replacing parts and iron tips, and not resume the use
until the equipment is completely cooled down.
Please use the accessories from the original factory when replacing the product parts.
Make sure to turn off the power switch when the equipment is temporarily stopped or
out of use.
Essential knowledge for users
3.Essential knowledge for users
Users are required to have basic knowledge of common sense and electrical
operations before using the product. Minors shall use the product under the
guidance of a professional or guardian.
Packing list
Main unit (including machine, power cable and handle)x1pc
Soldering wire holder x 1pc
User manual x 1pc
Specification
Item No.
Voltage
ST-2090D
110/240V AC
Temperature
Adjustable
stability
method
±
2℃
Knob
Operational guide
1. power button
Turn on after this device given by power. Set the temperature you want will be shown
on the nixie tube display by knob. It will show the real temperature value of the
soldering tip after 3 seconds.
2. Temperature Setting
When this device is working, it can adjust temperature rapidly by temperature knob,
the setting temperature will be shown when adjusting temperature, the real temperature
of soldering tip will be displayed after stopped adjusting temperature for 3 seconds.
Temperature range is 80~480℃.
2
Temperature
Power
range
80°C~480°C
80W
Temperature
Display method
unit
°
C/ F
°
Nixie tube
setting
480
temperature
350
actual-measured
temperature
480
Up to be setting
temperature
4