Attero Tech unD6IO User Manual - Page 14
Browse online or download pdf User Manual for Recording Equipment Attero Tech unD6IO. Attero Tech unD6IO 18 pages. 4x2 multi-io dante wall plate interface
Print PageunD6IO
User Manual
3 – ARCHITECTS & ENGINEERING SPECIFICATION
3.1 – unD6IO A&E Specifications
The Dante 2-gang wall plate interface unit shall provide two front panel mounted mic/line analog inputs on XLR. Selectable
gains of -18dB, -3dB, +25dB, and +40dB and a +48V phantom power option shall be provided via software for each
balanced mic/line input. These mic/line inputs are digitized and introduced to the Dante audio network as transmit
channels 1 and 2.
The device shall also provide two sets of unbalanced line level input connections: one on a set of RCA connectors, the
other using a stereo 3.5mm TRS connection. These inputs are selectable for independent or summed operation via
software and introduced to the Dante interface on Dante transmit channels 3 and 4. The internal analog to digital signal
conversion shall be performed at 24-bit resolution with a sampling frequency of 48 kHz.
The Dante interface unit shall provide two balanced analog inputs on the side of the in-wall enclosure via a 6-pin
depluggable Phoenix-style connector for analog conversion of up to 2 Dante digital audio network channels. Additionally,
the two received Dante output channels shall also be converted and output on a front panel mounted 3.5mm stereo TRS
connector. The internal digital to analog signal conversion shall be performed at 24-bit resolution with a sampling
frequency of 48 kHz.
The Dante interface unit shall receive power over the Ethernet cable from an IEEE 802.3af PoE compliant network switch
or midspan injector.
The Dante interface shall be compliant with the RoHS, WEEE and REACH directives. The Dante interface unit shall be
Compliant with the EMI/EMC requirements for FCC and CE.
The Dante interface unit shall be the Attero Tech unD6IO.
Attero Tech LLC 2017
Page 13
614-00029 Rev 02_b