ATTIAS USA-60 Installation And Operating - Page 10

Browse online or download pdf Installation And Operating for Mixer ATTIAS USA-60. ATTIAS USA-60 11 pages. Commercial dough mixers

Print Page

HOW TO CARE FOR THE ATTIAS

60-QUART AND 80-QUART MIXER BOWLS

(DO'S AND DON'TS)

1) DO NOT use abrasive cleaning materials, such as Brillo pads or metal scrapers. The

tin is soft and should be cleaned with a soft cloth.

2) DO NOT use a cleaning agent containing a high percentage of free alkali or acid.

3) DO NOT use detergent containing a high percentage of Tin-sodium phosphate or

meta-silicate. Tin is reactive to both.

4) DO NOT subject tinned surfaces to extreme heat. The melting point of tin is

approximately 450 degrees.

5) DO NOT abuse or strike the side of tinned containers with metal stirring utensils. Tin

is soft and can be removed by continual abrasion.

6) DO NOT store a tinned item in a location of high humidity for long periods of time.

7) Rinse thoroughly after washing to remove agents that may be reactive to tin.

8) If sterilizing agent containing chlorine is used, the tinned surface must be thoroughly

rinsed. Chlorine is corrosive to tin.

9) Dry thoroughly after rinsing and store in a dry environment.

10) If water is exceptionally hard, drying is necessary to prevent permanent spotting.