3onedata ICS5400TSN-24GT16GS4XS-LN Series Quick Installation Manual - Page 3

Browse online or download pdf Quick Installation Manual for Switch 3onedata ICS5400TSN-24GT16GS4XS-LN Series. 3onedata ICS5400TSN-24GT16GS4XS-LN Series 4 pages. Layer 3 industrial ethernet switch

Print Page
LED
Indicate Description
X1-X4)
Ethernet port
Blinking
network status
Ethernet port has not established
OFF
valid network connection
【Logging in to WEB Interface】
This device supports WEB management and configuration.
Computer can access the device via Ethernet interface. The
way of logging in to device's configuration interface via
browser is shown as below:
Configure the IP addresses of computer and the
device to the same network segment, and the
network between them can be mutually accessed.
Enter device's IP address in the address bar of the
computer browser.
Enter device's username in the login window as
shown below.
Click "OK" button to login to the WEB interface of
the device.
Note:
The default IP address of the device is "192.168.1.254".
The default user name of the device is "admin", no
password.
If the username or password is lost, user can restore it to
factory settings via management software; all modified
configurations will be cleared after restoring to factory
settings, so please backup configuration file in advance.
is in an active
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
Gigabit copper port
Gigabit SFP
10Gigabit SFP+
Relay
CONSOLE port
Indicator
Switch Property
Backplane bandwidth
Packet buffer size
MAC Address Table
Power Supply
Model I
10/100/1000Base-T(X)
self-adaption or forced mode,
RJ45, Automatic Flow Control,
Full/Half
Duplex
Mode,
MDI/MDI-X Autotunning
100/1000Base-X
self-adaption
or forced mode, SFP slot
1G/2.5G//10GBase-X
self-adaption or forced mode,
SFP+ slot
1 relay alarm information output,
using
3-pin
5.08mm
pitch
terminal blocks, and the current
load capacity is 1A@30VDC or
0.3A@125VAC
CLI command line management
port (RS-232), RJ45
Power indicator, alarm indicator,
running
indicator,
interface
indicator
160G
32Mbit
32K
24VDC/48VDC
(12~55VDC),
dual power supply redundancy,
using
5-pin
5.08mm
pitch
terminal
blocks,
support
anti-reverse connection
Model II
110VAC/220VAC (85~264VAC),
dual power supply redundancy,
using AC socket with switch
Power Consumption
Model I
No-load: 19.5W@24VDC
Full-load: 47.3W@24VDC
Working Environment
Working temperature
-40~75℃
Storage temperature
-40~85℃
Working humidity
5%～95% (no condensation)
Protection grade
IP40 (metal shell)
【Disposal of Waste Electrical and Electronic
Equipment (WEEE 2012/19/EU)】
(Applicable in the EU-member states)
The crossed-out wheeled bin
symbol on the equipment or its
packaging indicates that the
product, at the end of its
service life, shall not be mixed
with unsorted municipal waste
but
separately, in accordance with
local laws and regulations.
A proper separate collection of
end-of-life equipment for the subsequent recycling, treatment
and environmentally compatible disposal, will help prevent
potential damage to the environment and human health,
facilitating the reuse, recycling and/or recovery of its
component materials.
Private users should contact their vendor or municipal waste
management service and ask for disposal information.
Professional users should contact their suppliers and check
the terms of their selling agreement.
This product must not be disposed of with other commercial
waste.
should
be
collected