3onedata ICS5530 Series Quick Installation Manual - Page 3

Browse online or download pdf Quick Installation Manual for Switch 3onedata ICS5530 Series. 3onedata ICS5530 Series 3 pages. Industrial core layer 3 ethernet switch

Print Page
Step 3
Enter device's username and password in the
login window as shown below.
Step 4
Click "OK" button to login to the WEB interface of
the device.
Note:
The
default
IP
address
"192.168.1.254".
The default username and password of the device are
"admin123".
If the username or password is lost, user can restore it
to factory settings via device DIP switch or
management software; all modified configurations
will be cleared after restoring to factory settings, so
please backup configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
10GbE interface
10GbE SFP+ port (10Gigabit /
Gigabit self-adaption)
1000M Combo port
Gigabit SFP
Console port
Alarm interface
Indicator
Switch Property
Backplane bandwidth
Buffer size
MAC address table
Power Supply
of
the
device
is
Model I
Model II
Power Consumption
Model I
Working Environment
Working temperature
Storage temperature
Working humidity
Protection grade
10/100/1000Base-T(X) RJ45
or 100/1000 Base-X SFP
interface (optional)
100/1000Base-X SFP slot
CLI command management
port (RS-232), RJ45
5-pin 5.08mm pitch terminal
block (R+/R-), support 2 relay
alarm information outputs
Power indicator, system alarm
indicator,
device
running
status
indicator,
interface
connection/running
status
indicator
168G
16Mbit
16K
Input power: 100~240VAC/DC
Access
terminal:
support
single-phase
socket
with
rocker switch
Input power: 18~72VDC
Access terminal: adopt 5-pin
5.08mm pitch terminal blocks
(power supply occupies 3
pins)
No-load: 21.1W@220VAC
Full-load:37.8W@220VAC
-40~75℃
-40~85℃
5%～95% (no condensation)
IP40 (metal shell)
【 Disposal of Waste Electrical and Electronic
Equipment (WEEE 2012/19/EU)】
(Applicable in the EU-member states)
The crossed-out wheeled bin
symbol on the equipment or
its packaging indicates that
the product, at the end of its
service life, shall not be
mixed
municipal waste but should
be collected separately, in
accordance with local laws
and regulations.
A proper separate collection of end-of-life equipment for the
subsequent
recycling,
treatment
compatible disposal, will help prevent potential damage to
the environment and human health, facilitating the reuse,
recycling and/or recovery of its component materials.
Private users should contact their vendor or municipal waste
management service and ask for disposal information.
Professional users should contact their suppliers and check
the terms of their selling agreement.
This product must not be disposed of with other commercial
waste.
Users' cooperation in the correct disposal of this product will
contribute to saving valuable resources and protecting the
environment.
with
unsorted
and
environmentally