DT Research DT3 0 Series Basic Operation Manual - Page 3

Browse online or download pdf Basic Operation Manual for Tablet DT Research DT3 0 Series. DT Research DT3 0 Series 4 pages.

Print Page

OPERATION

Powering ON and OFF

To activate the DT310CR, push and quickly release the Power Button. The display will

come on in a few seconds. To put the DT310CR in Standby mode, push and quickly

release the Power Button. To turn the DT310CR off for extended storage, power

off safely using any software function that "shuts down computer" provided in the

software operating system.

NOTE:

The battery pack shipped with your tablet may be low in power—please use

the AC-DC adapter with the DT310CR when setting up for the first time to fully

charge the battery pack, or use the optional battery charger kit.

NOTE:

When the battery pack is charging, the blue-colored Battery LED should blink

slowly. If plugging in the AC-DC adapter does not trigger this blinking activity

and the LED stays dark, the battery pack(s) may have been drained substantially.

Try unplugging/ replugging the AC-DC adapter to the DT310CR a few times to

activate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Button to put the

tablet in "Standby" mode while not in use. Pushing briefly on the same button

will wake up the system within seconds.

NOTE:

Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the

tablet—this form of hardware shutdown is intended to be a means of recovery

from lockups, and not as normal operation.

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed after a launch sequence of several seconds. The wireless

LAN connection may take 10-15 seconds to be established.

Conﬁguring the Mobile Tablet

The DT310CR may be configured using the utilities and methods dictated by

the software operating system. The DT310CR should be configurable for various

properties such as user profiles, network features, and several system elements.

Wireless Networking

Wireless LAN

The DT310CR is often delivered with an embedded (user-inaccessible) 802.11ac

WLAN adapter equipped with a hidden custom antenna.

•

Through the support of typical WLAN adapters, the DT310CR should be able to

detect all 802.11 access points in the vicinity for you to select the access point of

your choice for connection.

•

The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT310CR and the

access points have to match. The SSID is case-sensitive and it is recommended

that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for

secure access.

•

When WEP/WPA/WPA2 is enabled, you may need to consult your network

administrator or your networking equipment literature to properly configure

associated settings such as Authentication mode, etc.

•

Refer to the access point operating manuals for setting up the 802.11 access

points.