DT Research DT307SQ Basic Operation Manual - Page 2
Browse online or download pdf Basic Operation Manual for Tablet DT Research DT307SQ. DT Research DT307SQ 2 pages. Mobile pos tablet
Print Page
DT307SQ
DT307SQ I/O Ports
DT307SQ Front View
A
Magnetic stripe reader (Optional)
Trigger button
B
C
Camera (Optional)
D
LED Flash (Optional)
Power button
E
Battery switch
F
DT307SQ LED Status Indicators
1. Power Mode Status Indicator:
•
Blue: Device is powered on
•
Blinking Blue: Main battery charging
•
Orange: Low battery mode
•
Blinking Orange: Extremely low battery mode
•
Off: Device is powered off or in suspend mode
2. Wi-Fi Status Indicator:
•
Blue: Connected to a wireless AP
•
Blinking blue: Connecting to a wireless AP
•
Off: Wi-Fi is disabled
2
ENGLISH
DT307SQ Rear View
B
C D
E
A
F
G
H
DT307SQ Side View
A
G
Micro-SD card reader
I
Speaker
H
I
mini USB port
J
Headphone-out
J
USB 2.0 port
K
K
DC-in
L
L
Data Capture Module Operation Guide
If your DT307SQ comes with a Barcode Scanner, RFID Reader and/or MSR module(s), you
may refer to the steps below to configure the settings.
BASIC MODULE OPERATION
3 steps to capture the data results from Keyboard Wedge:
1.
Turn on module from the
Keyboard Wedge App
2.
Launch a note-related App
3.
Capture the data and verify the results
BARCODE SCANNER
Launch the scanner module, and adjust the parse data format :
1.
Tap the
Keyboard Wedge App
, select SCAN tab, and turn on the Scanner module
2.
Key in Prefix and Suffix codes to adjust the parse data format
3.
Click
Apply
NOTE: To ensure the system performance, turn on only the symbologies you are
going to use.
Add/ remove barcode symbologies
1.
Tap
Barcode Scanner App
2.
Turn on/off each barcode symbologies under
SYMBOLOGY tab
3
ENGLISH