DT Research DT395 Basic Operation Manual - Page 3

Browse online or download pdf Basic Operation Manual for Tablet DT Research DT395. DT Research DT395 4 pages. Mobile pos tablet
Also for DT Research DT395: Basic Operation Manual (4 pages)

Print Page

DT395

OPERATION

Internal Battery

Warning!

The Internal battery pack should only be replaced by an authorized DT Research service

representative. Please contact your product and/or service provider for internal battery

replacement service.

Powering ON and OFF

To activate the DT395, push and quickly release the Power Button. The display will come

on in a few seconds. To put the DT395 in Standby mode, push and quickly release the

Power Button. To turn the DT395 oﬀ for extended storage, power oﬀ the device safely

using any software function that "shuts down computer" provided in the software

operating system.

NOTE: The battery packs shipped with your tablet may be low in power—please use

the AC-DC adapter with the DT395 when setting up for the ﬁrst time to fully charge the

internal battery pack. You may charge the external battery pack with it attached to the

DT395, or with the optional external battery charger kit.

NOTE: When the battery pack(s) is (are) charging, the blue-colored Battery LED should

blink slowly. If plugging in the AC-DC adapter does not trigger this blinking activity

and the LED stays dark, the battery pack(s) may have been drained substantially. Try

unplugging/ replugging the AC-DC adapter to the DT395 a few times to activate the

charging process.

NOTE: To conserve power, use (push and quick release) the Power Button to put in

"Standby" mode while not in use. Pushing brieﬂy on the same button will wake up the

system within seconds.

NOTE: Avoid using the Power Button ("hold 4+ seconds" feature) to turn oﬀ the

tablet—this form of hardware shutdown is intended to be a means of recovery from

lockups, and not as normal operation.

ENGLISH

Start Up

If the power up (from Standby or otherwise) is successful, the appropriate interface will

be displayed after a launch sequence of several seconds. The wireless LAN connection

may take 10-15 seconds to be established.

Conﬁguring the DT395

The tablet may be conﬁgured using the utilities and methods dictated by the software

operating system. The DT395 should be conﬁgurable for various properties such as user

proﬁles, network features, and several system elements.

Wireless Networking

Wireless LAN

The DT395 is often delivered with an embedded (user-inaccessible) 802.11a/b/g/n

WLAN adapter equipped with a hidden custom antenna.

• hrough the support of typical WLAN adapters, the DT395 should be able to detect

all 802.11 access points in the vicinity for you to select the access point of your

choice for connection.

• he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT395 and the

access points have to match. The SSID is case-sensitive and it is recommended

that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure

access.

•

hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-

istrator or your networking equipment literature to properly conﬁgure associated

settings such as Authentication mode, etc.

• efer to the access point operating manuals for setting up the 802.11 access points.

Bluetooth

The Bluetooth conﬁguration application is enabled from the System Tray or from the

Windows Mobility Center. Follow the instructions and options provided within the

application to conﬁgure and invoke Bluetooth connectivity with the corresponding

peripherals.

ENGLISH