DT Research DT430 Basic Operation Manual
Browse online or download pdf Basic Operation Manual for Touch terminals DT Research DT430. DT Research DT430 4 pages. Handheld pos terminal
Also for DT Research DT430: Basic Operation Manual (2 pages)
DT430
SPECIFICATIONS
System
Processor
ARM 800 MHz
RAM
512MB
Storage
4GB Flash
Operating System
Microsoft® Windows® CE 6.0; Windows® Mobile 6
Display
4.3" TFT‐LCD with resistive touch; outdoor‐viewable display
Display Resolution
272 x 480 (WQVGA)
Network Interface
Built‐in IEEE 802.11a/b/g/n WLAN and Bluetooth 2.1 with EDR
Control Switch and Button
1 power button, 4 front buttons
Indicator
1 power‐on LED indicator, 1 WLAN enable/ communication indicator
Speaker/ Microphone
Built‐in speakers; 1 mono microphone
Input/Output Ports
1 headset jack, 1 USB 1.1 host, 1 cradle interface (USB2.0 and charging), 1 DC‐in jack
Power
AC/DC Adapter
Input: 100 – 240V AC; Output: 5V DC, 3A
Battery Type
Li‐ion battery 3760 mAh, 3.7V
Mechanical
Enclosure
PC+ABS, TPR
Stylus
Non‐electronic tip
Dimensions (H x W x D)
6.3 x 3.4 x 1.2 in/ 160 x 86 x 30 mm
Weight
0.9 lbs/ 415 g
Environmental
Regulatory
FCC Class B, CE, C‐Tick, RoHS compliant
Operating Temperature
Operation: 0°C ‐ 40°C; Storage: ‐20°C ‐ 60°C
Humidity
0% ‐ 90% non‐condensing
* Specifications subject to change without notice
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2012, DT Research, Inc. All Rights Reserved.
DT Research is a registered trademarks of DT Research, Inc.
4
ENGLISH
http://www.dtresearch.com
DT430
BASIC OPERATION GUIDE
ENGLISH
INTRODUCTION
Thank you for acquiring the DT430, part of the POS
Handheld line. The DT430 offers a 4.3" outdoor‐viewable
display, in a compact, rugged, and lightweight package.
The DT430 enables efficient point‐of‐service applications,
inventory management, and field services. The DT430
Point‐of‐Service Handheld provides the precise features needed to streamline
operations and improve productivity, data accuracy, and service.
PACKAGE CONTENTS
1. One DT430
2. One battery pack
3. Basic operation guide
4. Stylus lanyard and hand strap
PRECAUTIONS
Always exercise care when operating and handling the DT430.
Do not disassemble any portion of the DT430. It will void any product warranty on
DT430.
Do not use any power adapter or charging cradle other than the one provided with
the device or acquired from the manufacturer or its partners.
In the unlikely event that abnormal noise, strange odor, or smoke is present,
immediately power down the DT430 and disconnect all power sources. Please
report the problem to your device provider immediately.
Product label is on the battery compartment; it will be seen while loading the
battery.