DT Research DT166CR Basic Operation Manual - Page 2

Browse online or download pdf Basic Operation Manual for Controller DT Research DT166CR. DT Research DT166CR 2 pages. Embedded controller/system

Print Page
DT Research DT166CR Basic Operation Manual
DT166CR
Precautions
•
Always exercise care when operating and handling the DT166CR.
•
Never disassemble any portion of the enclosure. It will void any product warranty on the
DT166CR.
•
Do not use any AC/DC adapter other than the one provided with the device or acquired from the
manufacturer or its partners.
•
In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power
down the DT166CR and disconnect all power sources. Please report the problem to your device
provider immediately.
THE DT166CR
Front View
A
B
C
D
Power button
A
USB 2.0 ports
B
C
HDMI ports
D
Ethernet ports
Powering ON and OFF
The Power Button is located in the front of the DT166CR. The Power Button may be configured to
function differently depending on the power options of the operating system. In general, to turn the
DT166CR on, push and release the Power Button on the front bezel. The adjacent power LED will be
lit (blue) and the corresponding interface will be displayed on the display monitor.
To turn off the device, again depending on software operating system, push and release the Power
Button or use a software shutdown interface. In the event of system lockup, the Power Button may
be used to perform a reset on the device. To do that, push and hold the Power Button for at least 4
seconds. The system will shut down and all unsaved work may be lost. Pushing on the Power Button
again will restart the device.
2
ENGLISH
Rear View
E
F
G
H
I
COM ports
E
Audio jacks
F
G
USB 3.0 ports
H
DisplayPort
I
DC-in
Device Ports
The DT166CR features an optimal set of I/O ports while preserving the compact size of the
structure. The HDMI, DisplayPort, COM, Network (10/ 100/ 1000MB BaseT Ethernet), and Power
ports are supplemented by a set of USB and Audio ports.
VESA Mounting Bracket Installation Guide for DT166
It is quite simple to mount the DT166CR to VESA adapters or LCD monitors using the external
mounting bracket.
3
ENGLISH