DT SWISS RATCHET EXP Technical Manual - Page 14

Browse online or download pdf Technical Manual for Switch DT SWISS RATCHET EXP. DT SWISS RATCHET EXP 20 pages.
Also for DT SWISS RATCHET EXP: Maintenance Manual (13 pages)

Print Page

6. Put the installation cylinder onto the non

drive side of the hub.

→ By using the axle and the installation

cylinder, the hub shell is guided when

the ratchet is screwed on. The ratchet

cannot cant.

7. Tighten the threaded ratchet as tight as

possible by turning the hub clockwise by

hand.

→ While screwing in, make sure that the

ratchet is screwed in straight and does

not cant!

8. Remove the hub from the mounting / dismounting tool and put the tool out of the vice.

2.12 MOUNTING THE BEARING ON THE NON DRIVE SIDE

1. Make sure that the axle is in the hub with

the long side first.

2. Grease the bearing seat and the axle with

universal grease.

3. Push a new bearing on the axle with the

colored side facing outwards.

HXTXXX00N5314S /

HXTXXX00N5025S