3onedata IES3016 Series User Manual - Page 2

Browse online or download pdf User Manual for Switch 3onedata IES3016 Series. 3onedata IES3016 Series 4 pages. Industrial ethernet switches

Print Page

IES3016-4F

IES3016-8F

1. DIP switches (Retain)

2. Console port (Retain)

3. 2-pin terminal block for relay output (Retain)

4. Ground screw

5. Power input terminal block

6. DIN-Rail mounting kit

7. System running LED

8. Power indicator

9. Relay alarm LED

10. Link/ACT LEDs

11. 10Base-T /100Base-TX Ethernet port

12. 100Base-FX fiber port

【Appearance and dimension】

The series of products are the same size, and the number of the

Ethernet interface is different. Unit (mm)

IES3016-6F

【Power supply input】

DC Series Switch:

The product top panel provided 4 bit power supply input terminal

block, support DC input. DC power supply input supported

redundancy function, provided PWR1 and PWR2 power input,

can use for single, and can connect 2 separately power supply

system, use 1 pair terminal block connect the device at the same

time. If one of the power systems broke, the device can work

un-interruptible.

connection protection. Voltage input range is 12 ～ 48VDC

（terminal block defined as: V1-、V1+、V2-、V2+）.

Built-in

overcorrect

protection,

Reverse

AC Series Switch:

The Industrial Ethernet switches have singe power and

redundancy power two kinds of power input. The singe power AC

series top panel provides 3 bit terminal block for AC100~240V

power entered (L/+, PG, N/-)

Important notice:

1. Power ON operation: first of all, insert power cable's terminal

block into device's power port, then insert power supply plug into

power source

2. Power OFF operation: First off all, unpin power plug, then

strike the terminal block, please take care of operation sequence.

【Communication connector】

10/100BaseT(X) Ethernet port

The pinout of RJ45 port display as below, connect by UTP or STP.

The connect distance is no more than 100m. 100Mbps is used

120Ω of UTP 5; 10Mbps is used 120Ω of UTP 3, 4, 5.

RJ 45 port support automatic MDI/MDI-X operation. Can

connect the PC, Server, Converter and HUB .Pin 1,2,3,6

Corresponding connections in MDI. 1→3, 2→6, 3→1, 6→2 are

used as cross wiring in the MDI-X port of Converter and HUB.

10Base-T/100Base-TX are used in MDI/MDI-X, the define of Pin

in the table as below.