3onedata IES3016L-P Instruction Manual - Page 2

Browse online or download pdf Instruction Manual for Switch 3onedata IES3016L-P. 3onedata IES3016L-P 4 pages. Unmanaged industrial ethernet switch

Print Page

1. Grounding screw

2. Relay output (2 bits)

3. Power input

4. Console port (RS-232 serial

Port, RJ45)

5. Reset

6. DIN-Rail kit

7. Company logo and product name

8. Port indicator

9. System indicator

10. Alarm indicator

11. Power indicator

12. 100Base-FX port

13. 10Base-T /100Base-TX port

【Dimension】

Unit (mm)

【Power Input】

Top view

IES3016L series switch provides 4 bits terminal blocks

(V1-, V1+, V2-, and V2+).

Notice: 1. power on: please connect the power line to the

switch before you plug in the power plug.

2. Power off: please unplug the switch then

remove the power line from the terminal.

【Console Port】

IES3016L series switch provides 1 console port (based on

serial port).the console port is RJ45 connector in top panel. It is

used to connect the PC for program updating by using a

connecting cable along with the switch.

【Relay Contact】

The input terminal block of relay is in top panel of the switch.

It is the contact of alarm relay. It will be open circuit when alarm

happens, or it will be always closed circuit. IES3016L series

switch supports 1 alarm output to connect alarm indicator or

alarm buzzer to remind of operator in time in case of something

happened.

【Communication Port】

Front view

10/100BaseT(X) Ethernet port

10/100BaseT(X) Ethernet port is in front panel of the device.

The connector type is RJ45 and its pin definition is shown

below. The pinout of RJ45 port display as below, connect by

UTP or STP. The connect distance is no more than 100m.

100Mbps is used 100Ωof UTP 5 , 10Mbps is used 100Ωof UTP

3,4,5.　

RJ 45 port supports automatic MDI/MDI-X operation. It

can connect the PC, Server, Converter and HUB. Corresponding

connection of Pin 1,2,3,6 in MDI: 1→1, 2→2, 3→3, 6→6;

corresponding connection of pin 1,2,3,6 in MDI-X: 1→3, 2→6,

3→1, 6→2. the definition of Pin in the table as below.

Note："TX±"transmit data ±，"RX±"receive data ±，"—" no use。

MDI (straight-through cable)

MDI

MDI-X

TX+

RX+

TX-

RX-

RX+

TX+

RX-

TX-

4, 5, 7, 8

—