bouncepad Flex Assembly Instructions - Page 2
Browse online or download pdf Assembly Instructions for Racks & Stands bouncepad Flex. bouncepad Flex 2 pages.
Also for bouncepad Flex: Assembly Instructions (2 pages)
Print Page
Mount Plate Cover
Tighten screw(s) using hand tools, using electric
Locate the
B3
B4
Cover onto
the Flex.
Tighten screw(s) using hand tools, using electric
T20 Pin Torx Driver Bit
M4x16mm Buttonhead screw
M4 Split Washer
Case Washer
B7
1
Go to step 1.
Feed the tablet cable
4
through the Bouncepad
Case & Flex.
M4x12mm
Countersunk
Screw
Front
tools may damage your Bouncepad.
Join the Flex Arm & Mount Plate in
the orientation shown.
tools may damage your Bouncepad.
Locate and attach the
Bouncepad Case to the
Flex as shown.
Place the tablet into the
5
Case and connect to
power.
No.8
Countersunk, Self
tapping Screw
Front
Tighten screw(s) using hand tools, using electric
tools may damage your Bouncepad.
Secure the Flex to the
B5
surface with the 4x
countersunk fixings.
Unlock & remove the
2
Faceplate from the
Bouncepad Case.
Locate & lock the
6
Faceplate onto the
Bouncepad Case.
Adhere the Mount Cover
B6
onto the Mount Plate
with the adhesive tabs.
4x Corner Pieces
4x Tablet Supports
1x Cable Clip
Install the Tablet Setup Kit. Each
3
kit is specific per tablet device and
Bouncepad Case.
Key number here
*We recommend recording the key number so
you can purchase additional keys in the future.
Installation is now
7
complete.