DTD STREAM 25 Owner's Manual - Page 11

Browse online or download pdf Owner's Manual for Diving Instrument DTD STREAM 25. DTD STREAM 25 18 pages. Buoyancy compensator
Also for DTD STREAM 25: Manual (6 pages)

Print Page

Threading the waist belt strap through the buckle

Take the left side of the waist belt strap and thread through the individual holes
in the buckle, starting at the end hole (pic. 1, 2, 3). After we recommend securing
the strap by pulling it back through the first hole (pic. 4)
pic. 1
pic. 2
pic. 3
pic. 4
TIP:
Do not shorten the straps after the first fitting. Wait until you test your gear
in the water. You will be doing additional adjustments for 3 to 5 dives until the
gear is fitted properly on your back – as snug as is comfortable. Only then you
can shorten them to leave an extra 10 to 15 cm on each side. We recommend
finishing off the right side of the waist strap in an arc. When shortening straps
do not forget to finish them off properly so that they do not fray.
Revised – February 2020
10