Attonic AD-TM50 Operation Manual - Page 16

Browse online or download pdf Operation Manual for Measuring Instruments Attonic AD-TM50. Attonic AD-TM50 20 pages.

Print Page
Attonic AD-TM50 Operation Manual
8-2.Batch transfer
Transfer all the stored data to a PC, etc. in a batch.
* For example, if the number of stored data is 20, "N:〇〇〇" at the top center of the screen will be "N: 020".
When this "N: 020" is set, 20 data will be transferred in a batch.
* The value of "〇〇〇" in "N: 〇〇〇" cannot be changed.
* Short press the "FUN" switch to move to all clear function.
* Long press the "FUN" switch to return to measurement mode.
8-3.All clear
Delete all the stored data.
* For example, if the number of stored data is 20, "N:〇〇〇" at the top center of the screen will be "N: 020".
* The value of "〇〇〇" in "N: 〇〇〇" cannot be changed.
* Short press the "FUN" switch to move to history data display function.
* Long press the "FUN" switch to return to measurement mode.
The display changes
every time the "DAT"
switch is pressed.
If the USB data transmission
fails and then press the "POW"
switch, the screen display will change
to "CANCEL".
The display changes every
time the "DAT" switch is
pressed.
Press the "POW" switch to
"FUN" switch
To all clear
function
Press the "POW" switch
"FUN" switch
To history data display
function
transfer the data.
* This screen
appears when
the data transfer
is finished.
to delete the data.
* This screen
appears when the
data deletion is
finished.