Attonic AD-TM50 Operation Manual - Page 7

Browse online or download pdf Operation Manual for Measuring Instruments Attonic AD-TM50. Attonic AD-TM50 20 pages.

Print Page

5.Preparation for measurement

5-1.Check the charging status

Be sure to check the charging status (battery icon) before using this meter.

* The sign on the upper left of the screen is the battery icon.

* If you need to recharge the battery immediately, use the supplied AC adaptor to recharge the battery.

Battery icon

：In good condition with more than 50% power remained.

：Less than 50% remaining. A status that requires caution. (still usable.)

：Recharging is required immediately.

5-2.Mounting

・When measuring by holding this meter in your hand, please be careful about the surroundings.

・When fixing this meter, use a tool appropriate to fixing it firmly in 2 places with M5 screws.

* When fixing to a device, etc., check the fixing method and fix this meter firmly with a tool, etc.

5-3.Attachment installation

・Use the supplied attachments according to the measurement conditions.

* If you cannot measure with the supplied attachments, please contact us.

We also manufacture special attachments.

* Do not use the attachments from other suppliers. They may cause a malfunction or injury.

Cautions

・When the power is turned off, the stored data (N:〇〇〇) will be cleared to zero.