Attop X-PACK 3 Operation Manual

Browse online or download pdf Operation Manual for Drones Attop X-PACK 3. Attop X-PACK 3 5 pages.

Print Page

X-PACK 3 Operation Manual

(Suitable for wide indoor environments operation)

Suitable for 14 years old and above

Get Assistance & Extended Warranty

Use camera or QR scanner to scan

Or Visit: https://attop.afterservice.vip

www.attoptoys.com

Customer Service Email : [email protected]

3.Install

(1) Open Up all 4 blades for the drone

This aircraft is folding structure, please do open up all four blades before power on.

(2) Blades Protector Installing

Expand the buckle of the propeller guard, and install it onto the drone wings.

(3) Battery Installing

Insert the battery into specified

position.

Keep press the buckle of battery

then pull the battery back to take it out.

Remote Controller:

AAA 1.5V

Battery Case

Keep pressing the buckle of battery

case then pull the case to take it out,

insert 3xAAA battery into specified

position.

1. Package Contents

Drone X1

Remote X1

USB cable X1 Propeller guards X4

2.Charging

Low battery warning

When the drone is flying, the indicator lights on the drone are flashing, and the remote

control handle emits a "beep" alarm sound, indicating that the drone power is too low.

At this time, the drone needs to return and charge.

Charging Guide for battery

1. Connect the USB cable with power supply, the USB LED solid Green, indicate the

USB cable is power on.

2. Connect the battery with USB cable. When USB LED solid Red indicate charging

status. USB LED solid Green, when charging was completed.

Note： The connected USB Adapter should be less than or equal to 5V 2A, the

voltage not be greater than 5V, otherwise there is a risk of overloading the USB

cable. The flight time is about 8-9 minutes and the charging time is about 90 minutes.

(4) Phone clamp installing

Put the phone clamp to specified position on the remote, and make sure

fasten the phone clamp.

4. Remote Controller

（2）

（4）

（6）

（8）

(1) Power switch

(2) Left joystick

(Altitude Control, L/R turning)

(3) Right joystick

(Movement Control)

(4) Left function switch

(Take off/Landing, Emergency stop)

Phone clamp X1

Battery X2

Spare propellers X2

Screwdriver X1

（1）

（3）

（5）

（7）

（9）

(5) Right function switch

(Headless mode, Return)

(6) Take photo

(7) Video

(8) Speed switch

(9) 360° Stunt