Attwood 5095 Installation Instructions - Page 2

Browse online or download pdf Installation Instructions for Marine Lighting Attwood 5095. Attwood 5095 2 pages. 12-volt 1-mile bi-color pole light with task light

Attwood 5095 Installation Instructions
NOTE:
Navigation light poles are designed to support only the light. They
should never be used as flag poles or handles.
MAINTENANCE
When not in use, always store pole light in Pole Light Storage Clips
(Attwood 7571). Choose a storage location where it will not be damaged
or be in constant contact with water. Close the base cover when light
is stowed to protect the contacts and seal the deck.
Replacing Bulb
1. Twist lens helmet 1/4 turn counter-clockwise to remove.
2. Replace Navigation Light bulb with 9-Watt Wedge Base
Replacement Bulb (Attwood 9235).
3. Re-seat lens helmet and twist 1/4 turn clockwise until it clicks in
place. (Figure 4)
Task Light lamp is not serviceable. Clean the light with a mild soap
and warm water solution. Never use solvents or abrasives that may
damage the lens or housing of the Universal Fit Light.
Figure 4
Press Here
Task Light
Bulb
On
Off
Lens Helmet
Bulb #906
Lens Bayonet
Channels
ATTWOOD LIMITED WARRANTY
ATTWOOD CORPORATION, 1016 North Monroe, Lowell, Michigan
49331 ("Attwood") warrants to the original consumer purchaser that
Attwood brand products will be free from defects in materials and
workmanship under normal use and service for one year from the
date of original consumer purchases.
This limited warranty is not applicable if the product has been damaged
by accident, improper installation, unreasonable or improper use, lack
of proper maintenance, unauthorized repairs or modifications, normal
wear and tear, or other causes not arising out of defects in materials
or workmanship.
Attwood products are warranted for use on pleasure boats. Any other
use — including but not limited to commercial, racing, or non-marine
use — are not covered under this warranty. Attwood's obligation under
this warranty is limited to repair of the product at Attwood's plant or
replacement of the products at Attwood's option without expense
to the original consumer purchaser. Any expenses involved in the
removal, reinstallation or transportation of the product are not
covered by this warranty.
The product must be returned to Attwood's plant at the address
above, postage prepaid, and insured with proof of original purchase
including date.
If Attwood is unable to replace the product and repair is not commer-
cially practical or cannot be timely made, or if the original consumer
purchaser is willing to accept a refund in lieu of repair or replacement,
Attwood may refund the purchase price, less an amount for deprecia-
tion. The acceptance by Attwood of any product returned or any refund
provided by Attwood shall not be deemed an admission that the product
is defective or in violation of any warranty. Products that are replaced
or for which a refund is issued become the property of Attwood.
THIS WARRANTY IS ATTWOOD'S ONLY EXPRESS WARRANTY
OF THIS PRODUCT. NO IMPLIED WARRANTY SHALL EXTEND
BEYOND ONE (1) YEAR FROM THE DATE OF ORIGINAL CON-
SUMER PURCHASE. ATTWOOD SHALL NOT BE LIABLE FOR
ANY DAMAGES FOR LOSS OF USE OF THIS PRODUCT, NOR
FOR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES,
COSTS OR EXPENSES.
Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential
damages, so the above limitations and exclusions may not apply to
you. This warranty gives you specific legal rights, and you may have
other rights which vary from state to state.
© 2003 Attwood Corporation
1016 N. Monroe Street, Lowell, MI 49331-0260 www.attwoodmarine.com