Attwood 7250 Series Installation Instructions - Page 2

Browse online or download pdf Installation Instructions for Marine Lighting Attwood 7250 Series. Attwood 7250 Series 2 pages. 12-volt anchor/masthead light

Print Page

Figure 4

#10 Pan Head

Screw

1/8" (3mm)

Pilot Hole

3/8" (10mm)

Wire Access Hole

CONNECT POWER TO SWITCH

Use ONLY the rated voltage. Higher voltage can damage light and

void product warranty. All positive (+) wires must be protected by

fuse (2-amp for 12-volt, 1-amp for 24-volt).

1. Use 3-position, double-pole OFF/ON/ON switch. (Figure 5)

2. From the anchor/masthead light, connect gray wire to one (+)

switch terminal. This switch position should operate all-round

anchor light (both lamps).

3. Connect blue wire to the remaining (+) terminal. This position

should operate forward masthead running light only (one lamp

forward) and all other navigation lights.

4. Test forward running and anchor lights for proper operation.

ATTWOOD LIMITED WARRANTY

ATTWOOD CORPORATION, 1016 North Monroe, Lowell, Michigan 49331

("Attwood") warrants to the original consumer purchaser that Attwood brand

products will be free from defects in materials and workmanship under normal

use and service for one year from the date of original consumer purchases.

This limited warranty is not applicable if the product has been damaged by

accident, improper installation, unreasonable or improper use, lack of proper

maintenance, unauthorized repairs or modifications, normal wear and tear,

or other causes not arising out of defects in materials or workmanship.

Attwood products are warranted for use on pleasure boats. Any other

use—including but not limited to commercial, racing, or non-marine

use—are not covered under this warranty. Attwood's obligation under this

warranty is limited to repair of the product at Attwood's plant or replacement

of the products at Attwood's option without expense to the original consumer

purchaser. Any expenses involved in the removal, reinstallation or

transportation of the product are not covered by this warranty.

The product must be returned to Attwood's plant at the address above,

postage pre-paid, and insured with proof of original purchase including date.

If Attwood is unable to replace the product and repair is not commercially

practical or cannot be timely made, or if the original consumer purchaser is

Black Wire to Ground (-)

Blue Wire (+)

Mast Light (Forward)

Gray Wire (+)

Anchor Light (Aft)

Figure 5

In Line Fuse Holder

(pos)

(neg)

Battery

Black

Gray (pos-1)

(To Negative)

Anchor Forward

(All Around)

MAINTENANCE

1. To replace lens or lamps, remove top retaining screw and lens.

2. Replace lens with Attwood #912896.

3. Replace lamp(s) with Attwood #9230 (12-volt), #910409 (24-volt).

4. Reinstall lens and retaining screw.

5. To adjust tension on cam-lock adjustment handle: Use Phillips

screwdriver to loosen screw in center of handle (Figure 2). Adjust

tension so handle releases easily, and also holds light in position

when locked.

willing to accept a refund in lieu of repair or replacement, Attwood may refund

the purchase price, less an amount for depreciation. The acceptance by

Attwood of any product returned or any refund provided by Attwood shall not

be deemed an admission that the product is defective or in violation of any

warranty. Products that are replaced or for which a refund is issued become

the property of Attwood.

THIS WARRANTY IS ATTWOOD'S ONLY EXPRESSED WARRANTY OF

THESE PRODUCTS. NO IMPLIED WARRANTY INCLUDING, WITHOUT

LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, SHALL BE EXTENDED BEYOND

THE WARRANTY PERIOD STATED ABOVE FOR EACH PRODUCT. ATTWOOD

SHALL NOT BE LIABLE FOR ANY DAMAGES, FOR LOSS OF USE OF THIS

PRODUCT, NOR FOR ANY OTHER INCIDENTAL OR CONSEQUENTIAL

DAMAGES, COSTS, OR EXPENSES.

Some states do not allow limitations on how long an implied warranty lasts or

the exclusion or limitation of incidental or consequential damages, so the above

limitations and exclusions may not apply to you. This warranty gives you specific

legal rights, and you may have other rights which vary from state to state.

1016 N. Monroe Street, Lowell, MI 49331-0260

3-Position Switch

(Off/On/On)

Blue (pos-2)

Forward Running