ATV aD5 Quick Start Manual - Page 9

Browse online or download pdf Quick Start Manual for Drums ATV aD5. ATV aD5 16 pages.
Also for ATV aD5: Quick Start Manual (16 pages)

Print Page

Trigger settings

You'll need to make trigger settings when using the aD5 for the first time or after you've changed

the types of pads. This allows the data from the pad sensors to be processed correctly so that the

aD5's performance capabilities can be fully utilized.

You must set the following three items.

<1> Crosstalk cancel

setting (p. 9)

<2> Trigger setting for

each pad (p. 10)

<3> Hi-hat control pedal

adjustment (p. 10)

<1> Crosstalk cancel setting

Press the [HOME] button, and then press

[

]

Select the [SYSTEM] tab, and then press

[TRIGGER]

Press [Crosstalk Cancel Wizard]

As directed in the screen, strongly hit the

specified pad three times.

This prevents the "crosstalk" that can occur when the impact of striking a pad

reaches another pad, unintentionally triggering it.

Complete this setting simply by striking each pad as instructed by the crosstalk

cancel wizard.

These settings specify the response of each of your pads to ensure that the sound

accurately reflects the output of the pad sensor.

Simply select the model name of each pad, and the typical response is specified.

Make adjustments so that the hi-hat control pedal operates correctly.

Specified pad

* If you press [RETRY], the previous strikes are

discarded.

When the screen indicates "OK" press

[NEXT] to proceed

Repeat steps 4—5 in the same way

The aD5 calculates the state of crosstalk for

all of the connected pads.

* We recommend that you play a rimshot when

striking the snare pad.

* If the specified pad is not connected, press [SKIP].

When the following screen appears,

play the pads to verify that there is no

crosstalk, and then press [EXIT]

* If there is crosstalk, press [YES] and repeat the

wizard once again.

1 Getting Ready

indication