dtm Azymut Installation And Operating Manual - Page 5
Browse online or download pdf Installation And Operating Manual for Accessories dtm Azymut. dtm Azymut 8 pages. Wireless gate state sensor
Print Page
One-leaf gate
1. Mount the AZ-FLEXRX receiving module in the FLEX receiver (Fig. 3). Set the input in the signaling
mode in the FLEX receiver menu - 'Sr.St = on' option (see the FLEX receiver manual).
2. Mount theAZ-MG magnet on the post,AZ-TX transmitter on the gate wing (or vice versa), in such a
way that the magnet and the transmitter are opposite each other when the gate is closed (Fig.5).
Double leaf gate
1. Mount the AZ-FLEXRX receiving module in the FLEX receiver (Fig. 3). Set the input in the signaling
mode in the FLEX receiver menu - 'Sr.St = on' option (see the FLEX receiver manual).
2. Mount theAZ-MG magnet on the one leaf, theAZ-TX transmitter on the second gate leaf, in such a
way that the magnet and the transmitter are facing each other when the gate is closed (Fig.6).
Sliding gate
1. Mount the AZ-FLEXRX receiving module in the FLEX receiver (Fig. 3). Set the input in the signaling
mode in the FLEX receiver menu - 'Sr.St = on' option (see the FLEX receiver manual).
2. Mount theAZ-MG magnet on the post,AZ-TX transmitter on the gate (or vice versa), in such a way
that the magnet and the transmitter are opposite each other when the gate is closed (Fig.7).
Do not mount the transmitter in places exposed to magnetic fields from a source other
than a dedicated magnet. If the LED in the AZ-FLEXRX module changes state several
times during gate movement, install the magnet and / or transmitter in a different place.
Probably the metal elements weaken the magnetic field in the vicinity of the magnet.
Fig.5 Mounting the sensor on the one-leaf gate.
Fig.6 Mounting the sensor on the double leaf gate.
Fig.7 Mounting the sensor on the sliding gate.