AirTrack Factory AirBoard User Manual - Page 9

Browse online or download pdf User Manual for Sports & Outdoors AirTrack Factory AirBoard. AirTrack Factory AirBoard 12 pages.
Also for AirTrack Factory AirBoard: User Manual (7 pages)

Print Page

SET-UP

Foot pump

Make sure the adapter is placed on the hose properly (4) and the blower or footpump is set to infl ate (1,3).

Open the grey valve by twisting it to the left (6). Make sure the pin inside the valve is pressed out (8).

Attach the blower by twisting the adapter to the right (10) and turn on the blower. Your equipment should

start infl ating. When fully infl ated remove the hose. The equipment should not release air. (13)

Check the pressure with the manometer (optional) or jump on the equipment to test if the pressure is up

to your standards. If so, close the grey valve (15). Check the pressure before each training.

PACK UP

Defl ate the equipment by simply pressing the pin inside the grey valve. The equipment should defl ate.

Roll up the equipment and store it. To completely defl ate the equipment, the blower and foot pump can

be set to defl ate. This way the equipment will become completely fl at.

When rolling up the AirBeam, make sure that the center line is facing down!

www.airtrackfactory.com - [email protected] - Tel. +31 (0)24 89 09 659

OV10 blower