Absolute zero apS C830 User Manual - Page 5

Browse online or download pdf User Manual for Digital Camera Absolute zero apS C830. Absolute zero apS C830 18 pages. 360 degrees camera

Print Page

3. GETTING STARTED

The camera's top is marked by the Absolute Zero logos. The tripod mounts can be found on
both top and bottom. The lenses are positioned (tilted) to optimize filming in the assumed
position. That means the results will equally good, if you film with the camera upside-down.
!
!
Make sure the camera is always protected against dust and rain.
!
To turn the camera ON/OFF use the only button, found beneath lens nr. 6:
!
1.
Quick push turns the power ON. It takes about 60 seconds for the camera to initialise.
2.
Long 3 second push of the button turns the power OFF. It is recommended to always
send 's' or 'stop', before turning the power off. This stops any ongoing process and ensures
the lens modules have been properly shutdown.
The Bluetooth status is displayed with the blue LED located on the push-button. The LED has
three programmed states:
1. Initialisation - LED is ON, when camera is first turned on (60 seconds).
2. Ready to connect - LED is blinking, when waiting for user to connect.
3. Connected - LED is ON, when Bluetooth connection is enabled.
Picture 2: Push-button location
The blue LED can be disabled while in
quiet
mode.
5