Comtek COM-20VA Instructions Manual - Page 2

Browse online or download pdf Instructions Manual for Antenna Comtek COM-20VA. Comtek COM-20VA 8 pages. 20 meter vertical antenna

Print Page

Congratulations! You are now the proud owner of a Comtek 20 Meter Vertical Antenna. This

antenna may be built as a 20 meter, 17 meter, 15 meter, 12 meter or 10 meter monoband vertical

antenna.

Specifications:

• Full band coverage on 20 or 17 or 15 or 12 or 10 meters with SWR under 1.5:1

• No Tuner needed

• Bandwidth: Over 750 kHz

• Power Handling up to 5 kW

• Weight: Approximately 8 pounds

• Element Tubing: 3 element sections sized from 1" OD to .75" OD

• Under 17 ft overall height

Parts List:

Aluminum Mounting Plate, 7-1/2" x 5-17/32" x 1/4", Drilled

Element Insulator,

Aluminum Cast Saddle 1.5", for Element Insulator

Stainless Steel U-Bolt 1.5", for Element Insulator

Hardware kit for U-Bolts (Nuts, Lock Washers, Flat Washers)

Studded Band Clamp, 1", with hardware (for Feedpoint Connection)

Element Clamp, Stainless Steel, for 1" antenna element

Element Clamp, Stainless Steel, for 7/8" antenna element

Stainless Steel Saddle for 2" V Bolts, for customer supplied mounting pipe

V-Bolt for 1 to 2" OD customer supplied mounting pipe

Hardware kit for V-Bolts (Nuts, Lock Washers, Flat Washers)

Black Vinyl Cap, for top of 3/4" OD antenna element

Aluminum Element - 1.000" OD x 72" x .058" Wall (split one end)

Aluminum Element - 0.875" OD x 72" x .058" Wall (split one end)

Aluminum Element - 0.750" OD x 72" x .058" Wall (split one end)

WARNING!

INSTALLATION OF ANY ANTENNA NEAR POWER LINES IS DANGEROUS

Warning: Do not locate the antenna near overhead power lines or other electric light or power

circuits, or where it can come into contact with such circuits. When installing the antenna, take

extreme care not to come into contact with such circuits, because they may cause serious injury or

death.

Description

, 1.5" OD x 1" ID x 2" long, Split

EXTREN

- 2 -

QTY