ATZ HDMI4K Plus VGA-EM100IR-RX Manual - Page 10

Browse online or download pdf Manual for Receiver ATZ HDMI4K Plus VGA-EM100IR-RX. ATZ HDMI4K Plus VGA-EM100IR-RX 13 pages. Hdmi4k/vga over ip receiver with ir, rs-232, poe/ lan & usb/kvm extension

Print Page

Model

: ATZ HDMI4K+VGA-EM100IR-RX

Description: HDMI4K/VGA over IP Receiver with IR, RS-232, PoE/ LAN &

USB/KVM Extension

Receiver's Rear Panel

(1) MIC IN: Connect to an analog microphone using a 3.5mm plug. This audio will

be sent to the analog audio output on the connected Transmitter. (Unicast mode

ONLY)

Note: The Mic In audio channel back to the Transmitter is only active when an

analog source is also connected to the Line In port on the Transmitter.

(2) LINE OUT: Outputs stereo audio from the Transmitter (HDMI or Line In, LPCM

2.0 sources only). Connect to powered speakers or an amplifier for stereo analog

audio output.

(3) OPT OUT: Outputs audio from the Transmitter (HDMI or Line In, LPCM

2.0 & Bitstream sources only). Connect to powered speakers or an amplifier for stereo

analog audio output.

(4)

HDMI OUT: Connect to HDMI TVs, monitors or amplifiers for digital

video and audio output.

(5) VGA OUT: Connect to a VGA monitor or display for analog video output. (VGA or

Non-HDCP HDMI sources only)

Note: PC text and content with fine details may display with some

visual artifacts when transmitted at 4K@60Hz (YUV 4:2:0).

(6) ISP: For factory use only.

(7) LAN 1 (PoE)~3: Connect via a Gigabit Ethernet switch to compatible

Receiver(s) to transmit data, or to a PC/laptop to control the unit via WebGUI.

pg. 10

Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.

Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time

All specifications are subject to change without prior notice.