AIRTRONICS M11X Operating Manual - Page 2
Browse online or download pdf Operating Manual for Remote Control AIRTRONICS M11X. AIRTRONICS M11X 13 pages. 2.4ghz digital high response system
Print Page
INTRODUCTION
We appreciate your purchase of the new Airtronics M11X FHSS 2.4GHz radio control system. This operating manual is intended
to acquaint you with the many unique features of your state of the art M11X FHSS 2.4GHz radio control system. Please read this
operating manual carefully so that you may obtain maximum success and enjoyment from the operation of your new M11X FHSS
2.4GHz radio control system.
The M11X FHSS 2.4GHz radio control system has been designed for the utmost in comfort and precise control of all types of
model cars and boats. We wish you the best of success and fun with your new purchase.
SAFETY
Be certain to read this operating manual in its entirety.
'Safety First' for yourself, for others, and for your equipment.
operate your radio control equipment.
If at any time during the operation of your model, should
you feel or observe erratic operation or abnormality, end
operate your model again until you are certain the problem
Your model can cause serious damage or injury, so please
use caution and courtesy at all times.
This radio control system operates on the 2.4GHz frequency band. The 2.4GHz connection is determined by the transmitter
Additional 2.4GHz receivers can be purchased and paired with the included 2.4GHz transmitter through the pairing operation.
Please note that due to differences in the implementation of 2.4GHz technology among different manufacturers, only Airtronics brand
2.4GHz FHSS receivers are compatible with your radio control system. Please see your Airtronics dealer for more information.
FCC COMPLIANCE STATEMENT
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more th the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
WARNING:
to operate this equipment.
RF Exposure Statement
moisture.
Please waterproof the receiver and servos by placing them
modelers or your local hobby shop for guidance.
The low voltage alarm will sound when the transmitter battery
voltage drops to ~6.7 volts. If this occurs, stop using the
transmitter as soon as possible, then recharge the transmitter
battery.
Page 2