AU AQUIS PAD SHT22 Basic Manual

Browse online or download pdf Basic Manual for Tablet AU AQUIS PAD SHT22. AU AQUIS PAD SHT22 2 pages.

Print Page

Preface

Thank you for buying the "AQUOS PAD SHT22" (simply called the "SHT22" or

the "product" from here on).

Before using the product, be sure to read the "Basic Manual" (this manual)

and "Notes on Usage"/"Setting Guide" available on the au homepage to

ensure correct use. After you have finished reading the manuals, be sure to

keep them accessible and store the printed manuals ("

Manual), "

(Setting Guide)) (Accessories) in safe places so that you can refer to them

whenever you need them. If you lose the printed manuals (Accessories),

contact an au shop or Customer Service Center.

Operating Instructions

"Basic Manual" and "Setting Guide"

The "Basic Manual" (this manual) and "Setting Guide" available on the au

homepage describe basic operations of major functions.

For detailed descriptions of various functions, refer to the "Instruction Manual

application" (Japanese version) that can be used on the product or "Full

Instruction Manual" (Japanese) available on the au homepage:

http://www.au.kddi.com/english/support/manual/

"Instruction Manual Application" (Japanese/English

Version)

You can use the "Instruction Manual application" (Japanese version) on the

product to check detailed operational procedures.

Also, you can activate intended functions from an explanation screen

depending on the functions.

On the home screen, tap [

Also, you can use the "Instruction Manual application" (English version) on the

product to check operational procedures.

On the home screen, tap [APPS]

•

language to English ( P. 15).

The company names and product names appearing in this manual are

trademarks or registered trademarks of their respective holders.

• To use the application for the first time, you need to download and install it

•

For exemptions, refer to "Notes on Usage" available on the au homepage.

by following on-screen instructions.

Safety Precautions

Before you start using the product, be sure to read the "Notes on Usage"

available on the au homepage to ensure correct use.

Before you assume that the product is malfunctioning, check for possible

remedies in the following au Customer Support site of au homepage:

http://www.au.kddi.com/english/support/

When Using the Product

• Communication is not possible even inside the service area in places where

the signal does not reach (e.g. tunnels and basements). Also,

communication may not be possible in poor reception areas. Communication

may be interrupted if you move into a poor reception areas during

communications.

• Since this product uses radio waves, the possibility of communication

intercepts by third parties cannot be eliminated. (Though the LTE/CDMA

system has highly secure confidential communication features.)

• Since the product is a radio station under the Radio Law, you may be asked

to temporarily submit the product for inspection in accordance with the

Radio Law.

• The IMEI information of the product is automatically sent to KDDI

CORPORATION for maintenance and monitoring operational status of the

product.

• Since the battery is built into the product, you cannot replace it yourself. For

replacing the battery, contact an au shop or Customer Service Center.

• Take care not to inconvenience people around you when you use the

product in a public place.

• If you are using the product overseas, check the relevant laws and

regulations of the country/region you visit.

• When the product is used by a child, parents or guardians should thoroughly

read the "Basic Manual" (this manual) or "Notes on Usage"/"Setting Guide"/

"Full Instruction Manual" (Japanese) available on the au homepage and

teach the child how to use it.

f Power key

Put the au Nano IC Card (LTE) on the au Nano IC Card (LTE)

Turn the screen on/off.

tray.

Hold it down to turn on/off the power, set the manner mode, etc.

Make sure the notches on the au Nano IC Card (LTE) and au Nano IC

Earphone jack

Card (LTE) tray face the proper orientation and put the card slowly on the

TV antenna

tray.

External connection jack

IC (metal) part up

When you connect the common AC adapter 04 (sold separately), the

microUSB cable 01 (sold separately), etc. to the product, some applications

may not function properly since the geomagnetic sensor is affected by the

magnetism of connected devices. Use the product after removing the

cable.

Notches

Mouthpiece (Microphone)

Transmits your voice to the other party during a call

. It is also used for

recording sounds. Take care not to cover the microphone with your fingers

etc. when using it.

* Voice calling using a telephone connection is not available. Voice calling is available

Slowly insert the au Nano IC Card (LTE) tray into the au

only with a voice call application using an Internet connection.

Nano IC Card (LTE) tray slot, taking care not to let the tray

be caught on the metal parts on both sides of the slot.

The back cover of the product cannot be removed. Removing it forcibly

may cause damage or a fault.

Confirm the position of the au Nano IC Card (LTE) tray slot and the

The battery is built into the product, and cannot be removed by the

orientation of the au Nano IC Card (LTE) tray carefully, and insert the tray

all the way into the slot in the direction of the arrow. Inserting the tray

customer. To force the power off, refer to "Turning the Power Off Forcibly"

forcibly may damage the tray.

( P. 13).

Internal antennas, Wi-Fi

/Bluetooth

antenna

Metal parts

Antennas are built into the product. Do not cover with hand during data

communication, or place stickers over antennas. Doing so may affect

communication quality.

Using the au Nano IC Card (LTE)

au Nano IC Card (LTE)

The au Nano IC Card (LTE) records your personal information such as phone

numbers.

The product is compatible with au Nano IC Card (LTE) only. You cannot use

Close the au Nano IC Card (LTE)/microSD memory card

the product by inserting the au IC-Card, micro au IC-Card or au Micro IC Card

cover.

(LTE) for au phones and smartphones instead.

Inserting the au Nano IC Card (LTE) tray not deeply enough may prevent

au Nano IC Card (LTE)

the product from functioning properly.

Take care not to lose or damage the removed au Nano IC Card (LTE) tray.

Removing the au Nano IC Card (LTE)

Before removing the au Nano IC Card (LTE), turn the product off and remove

IC (metal) part

the microSD memory card.

Open the au Nano IC Card (LTE)/microSD memory card

Make sure to unplug the microUSB plug of the common AC adapter 04

cover.

(sold separately) etc. from the product when attaching or removing the

au Nano IC Card (LTE).

Slowly pull the au Nano IC Card (LTE) tray straight out by

hooking a finger on it.

Attaching the au Nano IC Card (LTE)

Before attaching the au Nano IC Card (LTE), turn the product off and remove

the microSD memory card.

Open the au Nano IC Card (LTE)/microSD memory card

cover.

Slowly pull the au Nano IC Card (LTE) tray straight out by

hooking a finger on it.

au Nano IC

Remove the au Nano IC Card (LTE) from the au Nano IC

Card (LTE) tray

Card (LTE) tray.

Cell Phone Etiquette

Use of the product is not allowed in the following

places!

• Do not use the product while driving a car or riding a motorbike or bicycle. It

may cause a traffic accident. Use of the product while driving a car or

motorbike is prohibited by law. Use of the product while riding a bicycle may

" (Basic

be punishable by some regulations.

" (Notes on Usage) and "

• Be sure to turn off the product while you are aboard an airplane. Otherwise,

safety of your flight may be compromised.

List of Packaged Items

Before you start using the product, make sure that you have all the following

packaged items with the product.

Warranty

(Japanese)

] (APPS)

[

] (Instruction Manual).

SHT22

•

(Basic Manual) (Japanese)

[Basic Manual] after switching the display

•

(Notes on Usage) (Japanese)

•

(Setting Guide) (Japanese)

The following items are not included in the package.

• microSD memory card

• AC adapter

• Earphone

• microUSB cable

• Purchase a specified charger (sold separately).

• Illustrations in this manual are only for reference. They may look different

from the actual product.

The battery is built into the product.

Using au Disaster Countermeasure

Application

au Disaster Countermeasure is an application in which you can use Disaster

Message Board, Emergency Rapid Mail (Earthquake Early Warning, Disaster

and Evacuation Information, and Tsunami Warning), Disaster Voice Messaging

Service and Disaster Information/Donation website.

On the home screen, [APPS]

[au

Countermeasure).

The au Disaster Countermeasure menu is displayed.

Using Disaster Message Board

Disaster Message Board is a service to enable customers in disaster areas to

as an earthquake whose Japan seismic scale is approximately 6-lower or

more, occur. The registered safety information can be checked by customers

using au terminals, and also from other carriers' cell phones, PCs, etc.

For details, refer to "Disaster Message Board Service" on the au homepage.

From the au Disaster Countermeasure menu, [

(Disaster Message Board).

Follow the on-screen instructions for registration/confirmation.

To register the safety information, an e-mail address ( ezweb.ne.jp) is

required. Set the e-mail address in advance.

Slowly insert the au Nano IC Card (LTE) tray into the au

Nano IC Card (LTE) tray slot, taking care not to let the tray

be caught on the metal parts on both sides of the slot.

Confirm the position of the au Nano IC Card (LTE) tray slot and the

orientation of the au Nano IC Card (LTE) tray carefully, and insert the tray

all the way into the slot in the direction of the arrow. Inserting the tray

forcibly may damage the tray.

au Nano IC Card (LTE)

Metal parts

au Nano IC Card (LTE) tray

au Nano IC Card (LTE)

tray slot

Close the au Nano IC Card (LTE)/microSD memory card

cover.

Using a microSD Memory Card

Attaching a microSD Memory Card

Before attaching a microSD memory card, turn the product off.

Open the au Nano IC Card (LTE)/microSD memory card

cover.

Slowly insert the microSD memory card into the microSD

au Nano IC Card (LTE)

tray slot

memory card slot.

Confirm the orientation for inserting, then insert in the direction of the

arrow until it clicks and is locked.

Releasing the microSD memory card before it is locked may cause it to

pop out.

microSD memory card slot

Close the au Nano IC Card (LTE)/microSD memory card

cover.

au Nano IC

Card (LTE) tray

Make sure that the top/bottom and front/rear of the microSD memory card

are facing correctly.

Trying to force a wrongly oriented card into the slot could make it

impossible to remove the card or result in damage.

Do not touch the terminal part of a microSD memory card.

Deletion of the safety information and configurations for Safety

Notification Mail are not available during wireless LAN (Wi-Fi

)

connection.

The Company does not guarantee the quality of this service. The

Company, regardless of the cause, shall not be liable for any problems

related to registration of safety information due to the concentration of

access to this service or equipment errors, any loss due to the damage,

ruination, etc. of safety information or any loss arising from registered

safety information.

Using Emergency Rapid Mail

Emergency Rapid Mail is a service to collectively deliver Earthquake Early

Warning and Tsunami Warning provided by the Japan Meteorological Agency,

and Disaster and Evacuation Information provided by the national government

or the local governments to au terminals in the specified areas.

• At the time of purchase, receiving setting of Emergency Rapid Mail

(Earthquake Early Warning, and Disaster and Evacuation Information) is set

to "

" (Receive). You can receive Tsunami Warning by setting

(Disaster and Evacuation Information).

When receiving Earthquake Early Warning, secure your safety and act

composedly according to the surrounding situations.

When receiving Tsunami Warning, leave sea coasts immediately and

evacuate to safe places such as hills and strongly-built tall buildings.

From the au Disaster Countermeasure menu, [

] (Emergency Rapid Mail).

The inbox is displayed.

Stand

Select a mail to check to display the details of the mail.

(Sample)

(Delete)

Delete received mails.

(Settings)

(Earthquake Early Warning)

Set whether to receive Earthquake Early Warning.

• Tap [

] (Receive)/[

] (Not

receive)

[OK].

(Disaster and Evacuation

Information)

Set whether to receive Disaster and Evacuation

Information, and Tsunami Warning.

Disaster Voice Messaging Service is a service to record voices with a

• Tap [

] (Receive)/[

] (Not

smartphone, tablet, etc. and deliver them as a voice message to people to

receive)

[OK].

whom you want to deliver the information that you are safe when large-scale

(Volume)

disasters occur.

Set the volume of the receiving sound.

(Vibrator)

Set whether to activate the vibrator at the time of

reception.

(Linkage to the manner mode)

Set whether to notify you with the manner mode

settings applied in the manner mode.

(Earthquake Early Warning)

Check the receiving sound and vibration of the

product for Earthquake Early Warning.

(Disaster and Evacuation

Information)

Check the receiving sound and vibration of the

product for Disaster and Evacuation Information,

and Tsunami Warning.

This service is available only in Japan (Not available overseas).

] (au Disaster

Emergency Rapid Mail is free of both information charges and

You can check the histories of Disaster and Evacuation Information delivered

communication charges.

by the local governments, Disaster Information portal and donation website.

Emergency Rapid Mail cannot be received while the power is turned off.

Emergency Rapid Mail may not be received during communication such

as while sending and receiving e-mails/SMSs and while using the

browser or when you are in a place where the signal cannot be received

(e.g. tunnels and basements) or the signal is weak, even within the

service area.

Emergency Rapid Mail which failed to be received will not be able to be

received again.

When you receive Emergency Rapid Mail, you will be notified by the

dedicated alarm tone and the vibrator. The alarm tone cannot be

]

changed.

* When you receive Earthquake Early Warning, you will be notified by the alarm

tone, voice ("

" (Jishin-desu)) meaning that an earthquake has

occurred and the vibrator.

Information intended for the areas of other than your present location

may be received.

Removing the microSD Memory Card

Before removing the microSD memory card, turn the product off.

Open the au Nano IC Card (LTE)/microSD memory card

cover.

When you purchase the product, the internal battery is not fully charged. Be

sure to charge the internal battery before use.

Slowly push the microSD memory card in all the way.

• If the performance of the battery does not recover (e.g. the usable time after

After it clicks, let the microSD memory card come back out a little without

releasing it. Releasing the card when it is pushed deeply into the slot may

cause it to pop out.

• While charging, the charging/notification indicator illuminates in red, and the

Slowly pull the microSD memory card straight out.

Close the au Nano IC Card (LTE)/microSD memory card

cover.

Do not remove the microSD memory card forcefully. Doing so may result

in damage or data loss.

The microSD memory card may become warm after a long time use, but

this is not a fault.

Checking the IMEI

An IMEI (international mobile station equipment identity) is a special

identification code assigned to each phone. You can pull the IMEI tray out to

confirm the IMEI of the product.

Turn the product off and remove the au Nano IC Card (LTE)

You can connect this product and a commercially available USB host cable or

tray.

USB communication cable to charge a supported AQUOS PHONE or similar

For details on removing the au Nano IC Card (LTE) tray, refer to

device.

"Removing the au Nano IC Card (LTE)" ( P. 8).

• Conversion cable with USB host function capability and USB-microUSB

Slowly pull the IMEI tray straight out by hooking a finger

on it.

• For supported models and recommended cables, refer to the following

au Nano IC Card (LTE)

tray slot

IMEI tray

The followings are the explanation of how to connect the common AC adapter

04 (sold separately)/common DC adapter 03 (sold separately) to charge. For

details on the specified AC adapter (sold separately)/specified DC adapter

(sold separately), refer to "Introduction of Peripheral Devices" ( P. 19).

The IMEI is information required when requesting servicing or repairs.

The IMEI tray cannot be removed from the main unit. Take care not to

apply force when handling.

You can also operate the product to confirm the IMEI.

On the home screen, tap [APPS]

[Settings]

[Device info]

[Status]

and confirm the IMEI field.

As for this service, the Company shall not be liable for any damage

Illustrations and Descriptions in This

incurred on the users resulted from failure or delay of information delivery

Manual

due to communication disturbance or system failure, contents of the

information or other problems that are not supposed to be blamed on the

Note on Key Illustrations

Company.

For details on Earthquake Early Warning and Tsunami Warning provided

In this manual, the key illustrations are simplified as shown below.

by the Japan Meteorological Agency, refer to the agency's homepage.

http://www.jma.go.jp/jma/indexe.html

Earthquake Early Warning

Earthquake Early Warning notifies areas where a strong shaking (Japan

seismic scale 4 or more) is expected when an earthquake whose

maximum Japan seismic scale is predicted of 5-lower or more has been

detected.

This service detects an earthquake (P-wave, preliminary tremors) near

the seismic center immediately after the earthquake occurs and

automatically calculates its location, scale and predicted strength of the

shaking. After that, you will be notified of the earthquake as soon as

possible within a few seconds to dozens of seconds before a strong

shaking from the earthquake (S-wave, principal shock) occurs.

In the vicinity of the seismic center, a strong shaking may reach you

before Earthquake Early Warning.

Description of Operations for Selecting Item/Icon/Key

The Earthquake Early Warning distribution system provided by this

etc.

service is different from that provided by TV, radio and other

communication media and thus the arriving time of Earthquake Early

In this manual, operation procedures are described as below.

Warning may be different among those media.

Description

Tsunami Warning

Tsunami Warning notifies areas including target sea coasts of Major

On the home screen,

Tap "APPS" at the top of the 3-Line Home screen

Tsunami Warning and Tsunami Warning provided by the Japan

[APPS]

[Browser].

and tap "

Meteorological Agency.

f (hold down for at

Hold f down for at least 2 seconds.

Disaster and Evacuation Information

least 2 seconds).

Disaster and Evacuation Information notifies information related to the

* Tapping is to select a key or icon displayed on the screen by lightly tapping it with

safety of citizens, such as evacuation advisories, evacuation orders or

your finger.

various alarms delivered by the national government or the local

governments.

Notes on Illustrations/Screenshots

The screenshots in this manual are simplified and may look different from the

Using Disaster Voice Messaging Service

actual screens. Also, part of the screen may be omitted.

In this manual, part of the

screen such as icons are

omitted.

From the au Disaster Countermeasure menu, [

] (Disaster Voice Messaging Service).

Follow the on-screen instructions.

To use this service via Wi-Fi

, making initial settings via LTE/3G networks

is required.

Voice messages can be recorded for up to 30 seconds.

Voice messages can be exchanged among au terminals as well as other

carriers' cell phones and PHS devices.

Voices may not be heard when the media sound volume is set to low.

When no free space is left on the internal memory, voice messages may

not be saved or played.

Some cell phones cannot receive voice messages. For details, refer to

the au homepage.

Actual screen

Using Disaster Information/Donation Website

Explanations of this manual are based on the case when the product is

held vertically. If you hold it horizontally, menu items/icons/on-screen keys

etc. may be different.

From the au Disaster Countermeasure menu, [

Menu items, layers and icons described in this manual may be different

] (Disaster Information/Donation website).

according to functions being used and conditions.

Select an item to check.

In this manual, "microSD™ memory card (commercially available)",

"microSDHC™ memory card (commercially available)" and

"microSDXC™ memory card (commercially available)" are abbreviated

as "microSD memory card" or "microSD".

All of the indicated amounts exclude tax unless otherwise specified.

Plug the common AC adapter 04 (sold separately) power

Charging

plug into a 100 V AC power outlet/Plug the common DC

adapter 03 (sold separately) plug into a cigarette lighter

Charging

socket.

each charge has become extremely short), the internal battery may be at the

end of service life. On the home screen, tap [APPS]

[Settings]

[Device

info]

[Status]

[Battery status] to check the charging performance of the

internal battery.

Common AC adapter

battery icon is displayed with

superimposed. When the battery is

04 (sold separately)

charged to approximately 95%, the charging/notification indicator illuminates

in green. When charging is finished, the charging/notification indicator goes

When charging is finished, pull the microUSB plug of the

out.

common AC adapter 04 (sold separately)/common DC

Depending on the operation procedure and usage environment, the

adapter 03 (sold separately) straight out from the external

temperature inside the product may get high and the product may even

connection jack of the product.

get heated. In such case, charging may stop for security reasons.

Charging the internal battery while using the camera function etc. may

Unplug the common AC adapter 04 (sold separately) power

lengthen the charging time.

plug from the power outlet/Unplug the common DC

If you perform various operations with a specified charger (sold

adapter 03 (sold separately) plug from the cigarette lighter

separately) connected to the product, charging/discharging may take

socket.

place repeatedly in a short time. Frequently charging the internal battery

shortens its service life.

Although you can charge the internal battery while the power is turned

If you charge the internal battery when the battery has run out, the

on, charging time lengthens.

charging/notification indicator may not illuminate soon. However,

charging is in progress.

Charging with a PC

If the charging/notification indicator flashes in red, force the power off

( P. 13) and turn the product on again. If the indicator continues to flash,

The followings are the explanation of how to charge the internal battery by

stop charging the internal battery and contact an au shop or the Keitai

connecting the product to a USB port of a PC through which the battery can

Guarantee Service Center.

be charged.

If you stop charging while the charging/notification indicator still

illuminates during charging, the cell phone may be left not fully charged

Connect the microUSB cable 01 (sold separately) to a USB

even if

is displayed on it. In such case, the usage times shorten.

port of a PC after the PC is activated completely.

Charging Other Models

communication cable are sold separately.

manufacturer's site for product information.

USB port of a PC

http://3sh.jp/

microUSB cable 01

Charging with the Specified AC Adapter (Sold

(sold separately)

Separately)/Specified DC Adapter (Sold

Connect the microUSB cable 01 (sold separately) to the

Separately)

product after the product is activated completely.

If you use the microUSB cable to charge the internal battery, it may take

the internal battery longer to be fully charged than if you use the

specified AC adapter (sold separately).

Turn the protruding side of the microUSB plug up and insert the

Confirm the direction of the microUSB plug of the common

microUSB plug to the external connection jack of the product straightly.

AC adapter 04 (sold separately)/common DC adapter 03

Inserting the microUSB plug in the wrong direction may result in damage

(sold separately) and insert it in the direction of the arrow

to the external connection jack of the product.

The product is turned on when it is connected to a PC while the power is

turned off.

If you charge the internal battery when the battery has run out, the

charging/notification indicator may not illuminate. In such case, use the

External

specified AC adapter (sold separately) for charging.

connection jack

Protruding edges

Common AC adapter 04 (sold separately)/

Common DC adapter 03 (sold separately)

Names and Functions of Parts

Front

Earpiece (Receiver)

You can hear the other party during a call

Display (Touch panel)

Explanation

In camera lens

Proximity sensor/Light sensor

Browser".

Proximity sensor prevents inadvertent operations of the touch panel during

a call

Light sensor detects the ambient brightness and adjusts the brightness of

display.

ud Volume up/down key

Adjust the volume.

Long touch "u" on the Welcome Sheet (Lock Screen) to turn on the

mobile light.

Long touch "d" on the home screen or Welcome Sheet (Lock Screen) to

set/disable the manner mode. Alternatively, to disable the manner mode,

tap "u" on the home screen.

Charging/Notification indicator

* Voice calling using a telephone connection is not available. Voice calling is available

only with a voice call application using an Internet connection.

Back/Top and Bottom

In this manual

Out camera lens

Mobile light

Speaker

NFC mark

Hold it over a reader/writer when using NFC.

Send and receive data using Android beam.

Internal antennas

Wi-Fi

/Bluetooth

antenna

IMEI tray

Allows you to confirm the product's IMEI.

au Nano IC Card (LTE)/microSD memory card cover

au Nano IC Card (LTE) tray slot

microSD memory card slot

Turning the Power On/Off

Turning the Power On

f (hold down for at least 2 seconds).

The initial setting of the touch panel will be executed until "AQUOS PAD"

disappears from the screen after the power is turned on. Do not touch

the screen, otherwise touch panel operations may not be performed

properly.

Turning the Power Off

Common DC adapter

03 (sold separately)

f (hold down for at least 2 seconds).

[Power off]

[OK].

Restarting the Product

You can restart the product after turning it off.

f (hold down for at least 2 seconds).

[Reboot]

[OK].

Turning the Power Off Forcibly

You can force the product to turn off if the screen freezes or you are unable to

turn the product off.

f (hold down for at least 8 seconds).

Release your finger after the product vibrates to turn the power off.

If the power is turned off forcibly, unsaved data will be deleted. Do not

turn the power off forcibly unless you cannot operate the product.

Booting in Safe Mode

Turn the product off then boot it in a state close to that at time of purchase.

If operation of the product is unstable, it may be due to applications installed

after purchasing the product. If symptoms improve when booted in safe mode,

uninstalling the applications you installed may remedy symptoms.

Protruding edges

f (hold down for at least 2 seconds).

Long touch "Power off"

[OK].

"Safe mode" is displayed at the bottom of the screen when the product is

booted in safe mode.

To end safe mode, reboot the product.

When the product is turned off, you can boot it in safe mode by f

(hold down for at least 2 seconds) to turn it on, and then long touching

"d" until the Welcome Sheet (Lock Screen) is displayed after the au

External

logo disappears.

connection jack

It is recommended that you back up your data on the product before

booting in safe mode.

Widgets that you yourself created may be deleted.

Safe mode is not a normal state for the product to be booted in. End safe

mode before normal use.