Comtrol RocketLinx ES8108 Quick Installation Manual - Page 5
Browse online or download pdf Quick Installation Manual for Switch Comtrol RocketLinx ES8108. Comtrol RocketLinx ES8108 8 pages. Industrial
Also for Comtrol RocketLinx ES8108: User Manual (20 pages), Quick Installation Manual (6 pages), Quick Installation Manual (8 pages)
Print Page
Connecting to the Network
Connecting the Ethernet Ports
Connect one end of an Ethernet cable into the Ethernet port of the ES8108/ES8108F and the
other end to the attached device. All Ethernet ports support auto MDI/MDIX functionality.
Switch
3 TD+
6 TD-
1 RD+
2 RD-
Straight-Through Cabling Schematic
Always make sure that the cables between the switches and attached devices (for example,
switch, hub, or workstation) are no more than 100 meters (328 feet). The cable must meet
EIA/TIA-568 100-ohm specifications:
• 10BASE-T: 2-pair UTP/STP Category 3, 4, 5, or 5e
• 100BASE-TX: 2-pair UTP/STP Category 5 or 5e
Connecting the Fiber Ports (ES8108F)
Connect the fiber port to another Fiber Ethernet
device using the following diagram.
An improper connection will cause the fiber port
not to work properly. The fiber port is a standard
or square connector (SC).
ATTENTION
This is a Class 1 Laser/LED product.
！
Don't stare into the Laser/LED Beam.
Router or PC
Switch
3 RD+
3 TD+
6 RD-
6 TD-
1 TD+
1 RD+
2 TD-
2 RD-
Crossover Cabling Schematic
4
Switch
3 TD+
6 TD-
1 RD+
2 RD-
RX
TX
A
Cable Wiring(SC to SC)
TX A
RX A
RX
TX
B
RX B
TX B