ABSTRACT Gladiator Revolution Instruction Manual - Page 8

Browse online or download pdf Instruction Manual for DJ Equipment ABSTRACT Gladiator Revolution. ABSTRACT Gladiator Revolution 19 pages.

Print Page

Abstract Universal Instruction Manual

Operating the unit

When you turn the unit on, it will go through an initialisation routine where it

moves all the motors to their zero positions. You may hear some bumping

noises as the unit checks the limits of movement on the motors.

The initialisation routine takes about 20 seconds, after which the unit will begin

to respond to DMX input, or to sound if no DMX is connected.

Note: Units with halogen lamps do not turn the lamps on until

initialisation is complete.

If the unit is in stand alone mode (no DMX connected), it will automatically

produce a light show in response to the music, and will control any other units

connected to it.

If you have several units, you can tell which one is generating the light show by

looking at the green LEDs. The first unit in line will automatically generate the

light show and will flash its LED in time with the music. The other units will have

their LED's on continuously.

You can set several special options on the dip switches which affect how the

unit behaves in stand alone mode; see page 6.

Note: If you connect other manufacturers' products to the DMX

output while the unit is in stand alone mode, they will probably

not respond.

Remote control for Futurescan 1, Gladiator Revolution and DuoColour:

You can black out the unit (and any others connected to it by DMX) by pressing

the Blackout button. You can make the unit strobe by pressing the Strobe

button. You can make the unit move more slowly by pressing the Slow button.

If the unit is receiving DMX, the remote control will have no effect.

On the DuoColour you can lock the colour by holding down the slow button

for a few seconds (the Slow light flashes). You can then step through the colours

by pressing the Slow button briefly.

Page 8