Aube Technologies TI040 Installation And User Manual - Page 2
Browse online or download pdf Installation And User Manual for Timer Aube Technologies TI040. Aube Technologies TI040 4 pages. Industrial indoor / outdoor timer
Also for Aube Technologies TI040: Installation And User Manual (2 pages), Installation And User Manual (4 pages)
Print Page
Selecting the operating mode
The programmable switch has 2 operating modes: manual (MAN)
and automatic (AUTO). To switch mode, press the MODE button for 3
seconds.
Manual Mode
In Manual mode, the timer operates like a regular switch. Briefly
press the MODE button to activate or deactivate the load. (If you
have connected a remote switch to the timer for a 3-way installation,
the switch can also be used to activate or deactivate the load.) The
mode indicator (MAN) and the state (ON or OFF) are displayed.
Automatic Mode
In Automatic mode, the timer follows the programmed schedule (see
section 6). The mode indicator (AUTO), the state (ON or OFF) and
the current program number are displayed.
To temporarily override the programmed schedule, press the MODE
button or use the 3-way installation switch (if connected). The new
state indicator will flash to show that this state is temporary. The
override remains in effect until you press the MODE button (or use
the remote switch) or until the beginning of the next program.
Programming
You can set up to 7 programs. To set a program, you need to enter its
start time (ON) and its end time (OFF).
1. Press the PGM button to display a program and its On or Off
time. For example, when you first press PGM, program number
1 (P1) and its On time (ON) will appear. - : - - will appear
instead of the time if the program is not set (inactive).
2. Press the DAY button to select the day to which you want to
apply the program.
NOTE:
If you want to apply the same program to each day of the
week, press DAY until all the days are displayed. (This still
counts as 1 program, not 7.)
3. Press the HOUR and MIN buttons to set the ON time (time
when you want the lights to turn on). If you have selected the
12-hour format, ensure that PM appears on the screen when
an afternoon time is displayed.
4. After you have programmed the ON time, press the PGM but-
ton to display the OFF time (time when you want the lights to
turn off).
5. Repeat steps 3 through 5 to program the OFF time.
NOTE:
If you have used only one program to set the ON time for all
7 days, the OFF time of that program will automatically
apply to all 7 days.
6. To set another program, repeat steps 2 through 6. Programs
that are not set will remain inactive.
7. Press the MODE button to return to normal operation.
Clearing a Program
Press the PGM button until the desired program is selected. Hold the
PGM button for 3 seconds. - : - - appears when the program is
erased.
TI040
5.
Technical specifications
Supply: 120, 208/240 VAC, 50 / 60 Hz
Maximum load: See section 1
Output: Double Pole Single Throw (DPST)
Input (for 3-way installation only): Requires a dry contact
Battery backup: During a power outage, the screen is blank but the
programs are preserved using an internal rechargeable battery.
Operating temperature range: -40 °C to 50 °C (-40 °F to 122 °F)
Enclosure type: 3R
Certifications: CSA & UL
Warranty
Resideo warrants this product, excluding battery, to be free from defects
in workmanship or materials, under normal use and service, for a period
of three (3) years from the date of first purchase by the original
purchaser. If at any time during the warranty period the product is
determined to be defective due to workmanship or materials, Resideo
shall repair or replace it (at Resideo's option).
If the product is defective,
(i) return it, with a bill of sale or other dated proof of purchase, to the
place from which you purchased it; or
(ii) call Resideo Customer Care at 1-800-468-1502. Customer Care will
6.
make the determination whether the product should be returned to the
following address: Resideo Return Goods, 1985 Douglas Dr. N., Golden
Valley, MN 55422, or whether a replacement product can be sent to you.
This warranty does not cover removal or reinstallation costs. This
warranty shall not apply if it is shown by Resideo that the defect was
caused by damage which occurred while the product was in the
possession of a consumer.
Resideo's sole responsibility shall be to repair or replace the product
within the terms stated above. RESIDEO SHALL NOT BE LIABLE FOR
ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING,
DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY
WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF
THIS PRODUCT.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so this limitation may not apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY RESIDEO
MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
IS HEREBY LIMITED TO THE THREE YEAR DURATION OF THIS
WARRANTY. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may have other
rights which vary from state to state. If you have any questions con-
cerning this warranty, please write Resideo Customer Care, 1985 Doug-
las Dr, Golden Valley, MN 55422 or call 1-800-468-1502.
Customer Assistance
If you have any questions on the product installation or operation,
contact us at:
Resideo Technologies, Inc.
1985 Douglas Drive North, Golden Valley, MN 55422
1-800-831-2823
For more information on our products, go to
Printed in USA
www.customer.resideo.com
33-00024EF-03
7.
8.
9.
05/2020
2/2