Auber TD400P Instruction Manual - Page 5
Browse online or download pdf Instruction Manual for Controller Auber TD400P. Auber TD400P 5 pages. Programmable temperature controller
Print PageAUBER INSTRUMENTS
WWW.AUBERINS.COM
key to confirm. The display will show "JUMP" for a second and then the
controller will start executing the specified program step.
11. Connect the Sensor to the Controller
The connector of sensor contains a slot for fitting pin connection. It also has a
spring lock to prevent disconnections from accidental pulling on the cable.
To install the sensor to the controller: 1) Identify the key on the male sensor
connector (Figure 5, a) and the notch on the female connector (Figure 5, b). 2)
Hold the tail of the female connector, align the notch and the key, and push the
female connector forward.
To remove the connector, hold the spring loaded collar on the female
(c)
connector and pull it back. Please see Figure 6.
Figure 5. Install the sensor.
(a)
Figure 6. Remove the sensor.
(b)
Auber Instruments
5755 North Point Parkway, Suite 99
Alpharetta, GA 30022, USA
www.auberins.com
E-mail: [email protected] Tel: 770-569-8420
2015.06
P5/5