ADDER ADDERView Secure AVS-4128 Quick Start - Page 2
Browse online or download pdf Quick Start for Switch ADDER ADDERView Secure AVS-4128. ADDER ADDERView Secure AVS-4128 2 pages. 8-port high security flexi-switch
Print Page
Connections
Console peripheral connections
Keyboard/
Mouse
Speakers
Secondary
Primary
video output
video output
Operation
Connect all peripherals and computers to the Flexi-Switch. Ensure that the video display(s) are switched on before powering on the Flexi-Switch.
Switching between computers
The unit enables flexible association of computers to video displays and peripherals:
• Use the Source Selection buttons on front panel to choose which computer source to display on which video display. The keyboard/mouse
button is used to control whether the selection is associated with the source connected to the Primary or Secondary video display. A source can
be duplicated, by selecting the same number for both video displays.
• By default, mouse, keyboard and audio peripherals follow the display association. However, you can independently switch video, keyboard &
mouse ports between computers by using the keyboard/mouse button.
Console port indications
Video LEDs
USB LEDs
• Off - No device detected
• Off - No EDID
• Flashing - Read in progress
• Flashing - Device rejected
• On - EDID received
• On - Device approved
Audio Hold
The Audio Hold button prevents switching the audio port when changing the other console peripherals (keyboard, mouse, video) to another
computer channel. This function is useful when you need to listen to the audio from one computer while working on another.
Using the front panel computer channel buttons, first connect the console peripherals to the computer from where the audio feed is required.
Press the Audio Hold button on the front panel. Then press the channel button for the computer that is required for the other peripherals. The
audio association will be signalled by the right indicator on each channel's front panel push button.
To release the audio from hold status, press the Audio Hold button again.
Power on self-test
When the Flexi-Switch powers up it performs a self-test procedure. If the self-test fails for any reason, including a jammed button, the unit will
become inoperable. The front panel indicators will show an abnormal display. Contact technical support and avoid using the product.
Computer port 8
Computer
audio link
Computer port 7
Computer port 6
Computer
as per port 8
USB link
Computer
video input
Computer port 5
Computer port 4
as per port 8
as per port 8
as per port 8
Note: Ensure that all peripherals and computers are
switched OFF prior to connecting them to the product.
Computer port 3
Computer port 2
Computer port 1
as per port 8
as per port 8
Power in
as per port 8