Auber Instruments AW-SYL-2352 Instruction Manual - Page 4
Browse online or download pdf Instruction Manual for Controller Auber Instruments AW-SYL-2352. Auber Instruments AW-SYL-2352 4 pages.
Print Page
AUBER INSTRUMENTS
(4) Add a Device Button
To add a new device, tap this button and start the pairing process.
4.2. Device Main Page
A screenshot of the main page of AW-SYL-2352 is shown in Figure 8.
Figure 8. The main page of device AW-SYL-2352.
Main Panel
The device's main page is divided into 2 sections. The top half shows the
two display windows and the indicators in a similar way as they appear
on the device. The OUT indicator is shown as the Output status Bar.
The Set Value (SV) can only be viewed on this page. To change the SV,
please go to the "System Configuration" page by tapping the three-dot
menu button on the top-right corner.
Data Plot
The Wi-Fi module will record two sets of data in the past 50 minutes and
in the past 3 hours. Each data set has 100 data points, which contains a
time stamp, a probe value (PV), a set value (SV), and an output
percentage (OUT). A user can select from the dropdown list for "50 mins"
or "3 hours" to show the corresponding data plot. To export the data,
please go to the "Device" menu page and tap the "Export Data" button.
4.3. Device Menu
Bring up the menu by tapping the three-dot menu button on the top-right
corner. The menu has two items: "System Configuration" and "Device".
System Configuration
Most of the parameters on AW-SYL-2352 can be access from the
2022.10
Device Name
App Status
Main Panel
Data Plot
(End)
No part of this datasheet shall be copied, reproduced, or transmitted in any way without
the prior, written consent of Auber Instruments. Auber Instruments retains the exclusive
"System Configuration" menu (see Figure 9(a)).
The first parameter is the Set Value (SV). The rest of the parameters are
listed in the same order as they are in the controller's menu system. The
LOCK and EP1 to EP8 are not accessible from the app.
Device
In the Device menu page (see Figure 9(b)), a user can rename the
device, check the current firmware version of the Wi-Fi module, export
data, and go to our website to download the manual.
To export data, tap on the Export Data tab, the app will prompt you for
the next step. The data will be saved as a .CSV file and can be sent as
an attachment in an email.
The Wi-Fi communication module on AW-SYL-2352 is capable of over-
the-air (OTA) update for its own firmware. When a new firmware version
is published to the server, you can tap the "Version" tab to check for
firmware upgrade. If the firmware on this module is the latest, tapping on
this tab will do nothing.
(a)
Figure 9. (a) The System Configuration menu page. (b) The Device
menu page.
Auber Instruments Inc.
5755 North Point Parkway, Suite 99,
Alpharetta, GA 30022
www.auberins.com
Copyright © 2022 Auber Instruments Inc. All rights reserved.
rights to all information included in this document.
WWW.AUBERINS.COM
(b)
P4/4