daltile 1020 TS Operating Manual - Page 4

Browse online or download pdf Operating Manual for Saw daltile 1020 TS. daltile 1020 TS 16 pages. Tile

Print Page

It is extremely important that you read and

understand all of the safety instructions, the ope-

rating instructions and the maintenance instruc-

tions. If these instructions are not followed, seri-

ous injuries and/or death could occur to you or

to others. Also, failure to read and follow the

enclosed maintenance instructions can lead to

equipment failure, damage to the equipment or

reduced lifetime of the equipment.

SAFETY MESSAGES:

Safety messages are used to inform the per-

son(s) using this equipment of the potential

hazards that could lead to equipment damage,

serious injury or even death. The safety messa-

ges within this manual will be followed by one of

the following (3) three words that identify the

severity of the damage.

It is important that all instructions within this

manual be followed. If the instructions are not

followed it is possible that serious injuries could

occur as well as death.

It is important that all instructions within this

manual be followed. If the instructions are not

followed it is possible that serious injuries could

occur as well as death.

It is important that all instructions within this

manual be followed. If the instructions are not

followed it is possible that serious injuries could

occur as well as death.

PAGE 4 DALTILE 1020TS OPERATING MANUAL V02/2004R1

DALTOOL SAFETY

DAMAGE PREVENTION AND

INFORMATION MESSAGES:

A Damage Prevention Message is to inform the

user of important information and/or instructions

that could lead to equipment or other property

damage if not followed. Information Messages

convey information that pertains to the equip-

ment being used.

Each message will be preceded by the word

NOTE, as in the example below.

NOTE:

Equipment and/or property damage may result

if these instructions are not followed.

GENERAL SAFETY PRECAUTIONS

AND HAZARD SYMBOLS:

In order to prevent injury, the following safety

precautions and symbols should be followed

at all times!

Safety Precautions:

MACHINE GUARDS SHOULD BE

IN PLACE AT ALL TIMES

REMOVE ADJUSTING TOOLS.

The machine is supplied with some adjusting

tools for equipment maintenance. It is impor-

tant that the user of the machine makes sure

that all tools are removed or in their proper

storage area before the machine is turned on.

It is important that all machines

guards remain in place and in

proper working condition. This

is to prevent serious injury,

death or damage to the

equipment.