daltile 1048BRS Operating Manual - Page 5

Browse online or download pdf Operating Manual for Saw daltile 1048BRS. daltile 1048BRS 20 pages. Professional tile saw

Print Page
KEEPING THE WORK AREA CLEAN.
●
It is important that the working area be
clean so as to avoid potential accidents
or injuries.
DO NOT USE THE EQUIPMENT IN
●
DANGEROUS ENVIRONMENTS.
It is important that power tools not be
used in wet environments. The equip-
ment should never be used in the rain.
Also, it is advisable to keep the working
area well lit.
CHILDREN SHOULD BE KEPT AWAY
●
FROM THE WORKING AREA.
Only the operator of the equipment
should be in the working area. All other
people, especially children, should be
kept away at a safe distance.
KEEP THE WORKING AREA
●
CHILDPROOF.
It is important to keep the working area
child proof. This can be done by using
locks on the equipment, plastic plugs for
the electrical outlets and possibly even
master switches on the equipment.
DO NOT DRY CUT WITH THE MACHINE
●
The machine is not intended for dry
cutting use. Always use sufficient water
to wet cut tile, brick or natural stone. Dry
cutting will result in dangerous dust
levels (See also California Proposition
65 message) and will damage the instal-
led water pump. any equipment that is
returned with a damaged water pump
due to dry cutting will be repaired
or replaced totally at the customers
expence. There will be no warranty
claim.
FORCING THE TOOL.
●
The equipment was designed to do a
certain job. Do not force the equipment
to do something that it wasn't designed
to do.
DALTOOL
®
 SAFETY
USING THE PROPER EXTENSION CORD.
●
If you plan to use an extension cord
make sure it is in proper (good) wor-
king condition. Be sure that the exten-
sion cord is heavy enough to carry the
current that the machine requires to run
properly.
If you use an extension cord that is
underpowered a drop in voltage may
occur along with a loss of power and/or
overheating of the equipment
CLOTHING.
●
It is important that the operator does not
wear loose clothing that can potentially
get caught in moving parts of the equip
ment. It is recommended to wear non-
slip shoes along with a hair covering to
keep hair away from the moving parts.
SAFETY GLASSES AND HEARING
●
PROTECTION.
It is important to wear safety
glasses and hearing protection
when operating any type of
equipment. Be sure that the
safety glasses you wear are
impact resistant.
SECURE WORK
●
Clamps or a vise should be used to hold
your work whenever practical. Keeping
your hands free to operate the machine
is safer. When securing the material to
be cut by hand, be sure your hands stay
as far away as possible from the rotating
saw blade.
PROPER FOOTING
●
It is important to keep proper footing
and balance at all times when operating
equip ment. If proper footing is not
observed by doing such things as over-
reaching, serious injury may occur.
DALTOOL 1048BrS OPERATING MANUAL V02/2008R1 PAGE 5