daltile 828 BrS Operating Manual - Page 13

Browse online or download pdf Operating Manual for Saw daltile 828 BrS. daltile 828 BrS 16 pages. Tile saw

Print Page

UNPACKING AND SETTING UP

Make sure to disconnect the machine from the

power supply before fitting or replacing the cut-

ting blade or when doing any maintenance on

the machine.

Remove blade guard.

Block the sawing spindle with the 5 mm

Allen wrench.

Unscrew the 19 mm. hexagon nut with the

wrench and remove the saw flange.

(Attention: Left-handed screw threading)

Clean the saw flanges.

Fit the new cutting blade on the center ring

of the motor flange. (Check the direction of

rotation and make sure the blade is well

centered)

Mount saw flange and tighten with the

hexagon nut.

Place the blade guard and tighten with the

2 knobs.

DALTILE 828 BrS OPERATING MANUAL V02/2004R1 PAGE 13