Dam Easy Flood Barriers DME01 Instruction Manual - Page 9

Browse online or download pdf Instruction Manual for Protection Device Dam Easy Flood Barriers DME01. Dam Easy Flood Barriers DME01 13 pages.

Print Page
SECTION F: Replacing the seal
A
2
1
STEP 1: REMOVE USED SEAL
CAUTION/
IMPORTANT
Ensure Seal is deflated and Side Panels extended
sufficiently so T-Clips are fully visible on the top of
the barrier before removing the seal
2.0
Place the barrier flat on a smooth, even surface to safely remove the used seal
1.0
3.0
0
4.0
1.
Lift the Seal at both ends to release the T-Clip on the top of each Side Panel
2.
Open the Seal Replacement Panel
3.
Decompress the Quick Release Fitting to fully release the Seal
4.
Remove seal completely from beneath the barrier, segregate materials and recycle
at a registered recycling facility
16
A
B
3
4
780mm –1100mm
A
2.0
1.0
3.0
0
4.0
B
A
1
2
STEP 2: FITTING REPLACEMENT SEAL
CAUTION/
Do not remove the replacement seal from
IMPORTANT
packaging until immediately before replacement
Place the barrier flat on a smooth, even surface to safely replace the seal
1.
Insert the Seal Valve at the centre of the seal into the opening on the underside of
B
the barrier
and carefully secure to the inflation mechanism by compressing the
2.0
Quick Release Fitting within the Seal Replacement Panel.
1.0
3.0
0
4.0
2.
From the centre, run the Seal along the recess on the underside and along the
2.0
edge of the side panels, do not twist the seal. Click both ends into place
1.0
3.0
0
4.0
3.
The T-Clips must be flush at the top of each Side Panel
4.
Replace Seal Replacement Panel cover. The barrier is now ready for storage.
CONTINUE TO SECTION G, STORING THE BARRIER
SECTION F: Replacing the seal
A
3
B
3
2.0
1.0
0
A
3.0
4.0
17