Conairphone SW2514 Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Cordless Telephone Conairphone SW2514. Conairphone SW2514 8 pages. Classic wallphone with caller id

Print Page

CALLER ID OPERATION

NOTE: Batteries are required for Caller ID operation.

If an incorrect, invalid or incomplete

Caller ID signal is received, the LCD

shows '-LINE ERROR-'

If only the caller's phone number is received, the LCD shows

the caller's phone number with the

time and date it was received. The

'NEW' icon turns on and New Call

LED blinks.

If the name and number are not

available due to the caller's restriction,

the LCD shows '-PRIVATE CALL-' with

the time and date received. The 'NEW'

icon turns on and New Call LED blinks.

If the name and number are not

available, the LCD will show

'-UNAVAILABLE-' with the call's

time and date. The 'NEW' icon turns

on and New Call LED blinks.

If no key is pressed within 20 seconds,

the LCD will show the 'Answer-Ready'

mode, and display the total call counter,

new call counter, current time and date.

VIEW THE CALLER ID MEMORY

If you have new calls ('NEW' icon and New Call LED is lit).

Press [ ] or [ ] to read all of the most recent calls. The NEW CALL# will

decrease.

Once all the new calls have been read, 'END OF NEW CALL' will be

displayed.

Press [ ] to view the oldest calls, or press [ ] to view the most recent calls.

NOTE: After you view all the call in memory, the LCD will show 'END OF

LIST'.

NOTES:

1. The New Call LED will blink until all the new Caller ID data has been

reviewed.

2. If the 'RPT' icon is turned on, you have received multiple NEW calls from

the same number.

3. If you receive a call from a number stored in (previously reviewed)

memory, the data in memory will be replaced with the new call's time

and date and the 'NEW' icon will be turned on.

If no key is pressed within 20 seconds, the LCD will show the 'Answer-Ready'

mode, and display the total call counter, new call counter, current time and

date.

ERASE THE CALLER ID MEMORY

ERASE A SINGLE CALL IN CALLER ID MEMORY

Press [ ] or [ ] for the Caller ID memory location to be reviewed. To clear a

single Caller ID memory location, press [ERASE] twice quickly.

The data for that call will be erased, and the CALL# and Caller ID

information will be updated.

ERASE ALL CALLS IN CALLER ID MEMORY

After all new message being reviewed, press and hold [ERASE] for 3

seconds. The message 'ERASE ALL CALLS' will appear to confirm your

action. Press [ERASE] to clear all the information, then the message 'NO

CALLS' appear.

Both the total call and new call counters will become zero, and the current

time and date will be displayed.

NOTE: All new calls must be reviewed before clearing the entire memory.

CALL BACK (REDIAL) FROM THE CALLER ID MEMORY

With the handset hung up on the base press [ ] or [ ] to find the Caller ID

memory location to be redialed.

Press [CALL BACK] twice to redial, the LCD shows 'PICK UP CALL'.

Pick up the handset to make your phone call.

With the handset off hook, press [ ] or [ ] to find the Caller ID memory

location to be redialed. Press [CALL BACK] twice, the number will then be

dialed automatically.

WHEN THE CALLER'S PHONE NUMBER HAS A DIFFERENT AREA CODE

FROM THE PRESET:

The long distance dialing digit '1' will be inserted automatically during

Caller ID memory call back.

Press [CALL BACK], 11 digits number will blink. Press [CALL BACK] again

to confirm to dial the 11 digits number.