DAMSON S-SERIES User Manual - Page 2

Browse online or download pdf User Manual for Home Theater System DAMSON S-SERIES. DAMSON S-SERIES 7 pages.

Print Page

Unpack all contents

including power supplies.

Position the Soundbar

in front of the display

(TV/Projector),

connect power cable.

The system will now power up and configure itself.

The Subwoofer logo will turn blue, the Soundbar

logo will light up red and the S-Cubes logo will

display light blue.

User Guide for S-Series Home Cinema

Insert batteries

into Remote Control.

Couple the Dolby Atmos

speaker onto the soundbar,

it will snap into place.

Please note: On initial set up it is recommended to connect the power

supply of the subwoofer last as this provides auto-power upon initial

setup. If the subwoofer is powered up before the other speakers are

connected you will need to power off the subwoofer either by removing

the power cable or pressing the power button on the remote control

until the LED turns off, then power on again by remote control.

Select a location for the first S-Cube surround

speaker, connect power cable. For left surround

move switch on S-Cube to Triangle

surround select square

HDMI

INPUT 1

Insert the HDMI sources

into the Subwoofer.

Select a location for the Second S-Cube

surround speaker, connect power cable and

. For right

position the switch to the appropriate icon for left

HDMI

OUTPUT

Insert the

HDMI output that will

connect to the display.

Please note: The S-Cubes

are set up to power on

automatically to the surround

sound system only when

connected to a power supply.

or right surround.

Connect the power

supply to the sub-woofer.

The Logo will turn red on

the subwoofer.

Dolby, Dolby Atmos, Dolby Audio,

Pro Logic, and the double-D symbol

are trademarks of Dolby Laboratories