DAN NTP TECHNOLOGY DAD Thunder Core 256 Installation Manual - Page 8

Browse online or download pdf Installation Manual for Recording Equipment DAN NTP TECHNOLOGY DAD Thunder Core 256. DAN NTP TECHNOLOGY DAD Thunder Core 256 16 pages. Thunderbolt 3, dante, madi and adat digital audio interface

Print Page
Installation Guide Core 256
In DADman, configure each Core 256 in turn with a unique IP address and the preferred network mask e.g.
10.0.7.21 | 255.255.255.0. In this window you can also configure the IP audio network settings.
When you are done you can connect more than one Core 256 to the network, and they will appear in the
DADman Device List.
Automatic IP address
You must have a network with a DHCP server which will allocate the IP addresses, or the IP address will self-
assigned.
1.
Configure your computer IP address via the computer control panel to DHCP.
Select the Core 256 in the DADman Tools / Device List menu by right clicking on the unit line and select 'Network
settings'.
If you have more Core 256 units connected, they will all be configured with IP address via DCHP.
2.
Once the DHCP system has allocated an IP address to the unit it will appear in the DADman Device List
with the name AXCNTR.
Note. In order to have proper function of Core 256 the routing and sample rate configuration has to
be set correctly via DADman.

Installation of DAD Thunderbolt 3 driver for MacOS

The driver software has to be installed completely before it can work properly.
When you install the driver, it is of no importance whether you have units or other peripherical
devices connected to the Thunderbolt 3 / USB-C port on the computer. In the process described
below there are no devices connected before installation.
Doc no. AXCNTR-8001-A-4
Figure 3, DADman Device list w. settings
Rev. date 201123
Page 8 of 16