DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center Installation Manual - Page 19
Browse online or download pdf Installation Manual for Recording Equipment DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center. DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center 19 pages. Thunderbolt 3, dante, madi and adat modular analogue & digital audio interface
Print PageInstallation Guide AX Center
Electrical Specifications:
Power consumption
Input voltage
Mains fuse, mounted in IEC connector
Safety compliance
Power supply cord must be min. light sheathed flexible cord according to IEC60227 (designation 60227 IEC 52)
and include a protective earth conductor having a green-and-yellow insulation. Cross-sectional areas min.
3x0.75mm2"
Mains line plug type
110-125V
220-230V
240V
Mechanical specifications
Chassis standard
Chassis depth, without connectors mounted
Chassis body width
Weight
Environmental specifications.
Operating Temperature
Humidity
EMC compliance
Doc no. AXCNTR-8001-A-4
Digital section 15W
DAD I/O Options max 30w
Thunderbolt power max 2x15W
Mains 80 VA max.
90 – 260 VAC
100 – 240 VAC Nominal, 47 - 63 Hz
1 A, T1AH/250V
IEC 62368-1:2020+A11 2020
Correct type acc. to standard
UL817 and CSA C22.2 no 42
CEE 7 page VII, SR section 107-2-D1/IEC 83 page
C4.
BS 1363 of 1984.Specification for 13A fused
plugs and switched and unswitched socket
outlets.
19", 1 RU
32 cm / 12.6"
43.5 cm / 17.2"
2.8 kg / 6.5 lbs.
0 – 45 ºC / 32 - 113ºF
EN 55032:2015: emission
EN 55103-2, part 2: Immunity
EN 55035:2017: Immunity
FCC 47 CFR part 15 (B): emission
Rev. date 221023
Page 19 of 19