DAN NTP TECHNOLOGY DAD THUNDER CORE AX64 Installation Manual - Page 12

Browse online or download pdf Installation Manual for Recording Equipment DAN NTP TECHNOLOGY DAD THUNDER CORE AX64. DAN NTP TECHNOLOGY DAD THUNDER CORE AX64 19 pages. Thunderbolt 3, dante, madi and adat modular audio interface

Print Page

Rear panel connections.

Below is the layout of the rear panel of the AX64

Rear panel layout

1. Mains power connector. 1a Slot for installation of dual power connector option.

2. "Reconfig" button. Please refer to section below for further description

3. Expansion slot for optional dual MADI I/O mini module via optical or coaxial SFP modules.

4. RJ45 Ethernet connectors. Two ports for Control and Dante AoIP. Connectors can be set in switched or

redundant mode for Dante. In redundant mode the control network has to be connected to port 1.

5. Thunderbolt 3 interface for connection to a computer, and for an expansion unit or other peripherical

interface.

6. Word Clock or Video Black Burst synchronization input (configurable), BNC connector, and Word Clock

output.

7. MADI I/O BNC connectors.

8. Two set of TOSLINK optical ADAT input and output connectors. Input can also be set to S/PDIF

9. 8 Slots for Optional multi-format DAD I/O Cards

Doc no. AX64-8001-A-4

Figure 7, Rear panel layout

Rev. date 221023

Page 12 of 19