ADDER ALIF3000 Quick Start - Page 2

Browse online or download pdf Quick Start for Extender ADDER ALIF3000. ADDER ALIF3000 2 pages.

Print Page
Status indicator
ALIF 3000
ALIF 3000
–––––––––––––––
–––––––––––––––
Searching...
Searching...
• Off
No power.
• Green
All services present as
compared to the configuration
required.
• Amber
Running but video, USB or
network link missing (or not
connected to a transmitter/VM).
• Red
Booting before processor
loaded or failed.
• Blue
Factory reset mode active.
• Red/green flash
Booting into factory recovery
mode.
• Green/blue flash
Upgrade mode active.
• Fast green flash
Identify mode active.
To perform a manual factory reset
A factory reset returns the unit to its shipped version and
default configuration. Note: You can use the front panel screen
to discover the internal software version.
1 Power on the unit.
2 Press-and-hold the button located next to
the front panel screen for 10 seconds until the indicator
flashes blue and the screen shows the message: Factory
resetting device.*
Note: Do not power off the unit at this point.
3 The reset will take place and once complete, the screen
will show the message: Factory Reset Complete. Now
Reboot.
4 Cycle the power using either the recessed power
button (see right) or the power adapter input.
* Note: Firmware revisions up to v1.1.1 will behave slightly
differently. The message shown on the screen will be 'In
factory reset mode' and you will need to cycle the power at
that stage to complete the procedure.
Connections
Status
indicator
Gigabit
Ethernet
MANAGEMENT SERVER
AIM Server
A d
Secondary fiber or copper link (using 1GbE SFP modules) - KVM and VM links
Primary fiber or copper link (using 1GbE SFP modules) - KVM and VM links
AdderLink
www.adder.com
Reset
switch
Head
phones
d e r
L i n
k
3 0 0 0
1
2
Mic
Line
USB
out
1
3
5
12VDC
4
6
Power
USB
Secondary
in
display
Primary
display
CATx copper link - VM-only link
Gigabit
Ethernet
RJ45
network
port
1
2
3
2
Secondary
SFP port
Primary
SFP port